1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
ON-910-ON-970
Sondes thermistors d'immersion avec raccord NPT de 1/8 po et fil de connexion
Modèles en stock
- Capteur à immersion avec filetage de montage 1/8NPT
- Le ON-910 comprend une sonde de 4,5 pieds de long et 5/32 de diamètre avec des fils conducteurs isolés en PVC de 12 pieds de long. Le modèle ON-970 comprend une sonde de 5 pieds de long et 1/8 pouce de diamètre avec des fils conducteurs isolés en PFA de 12 pieds de long.
- Peut être utilisé dans des applications à immersion dans un liquide et sous pression
- Disponible avec des résistances de 2,252 ohms, 3,000 ohms, 5,000 ohms, 10,000 ohms et 30,000 ohms à 25 °C.
ON-910-ON-970
À partir de
C$
159.16
Modèles en stock
Aperçu du produit
- Nombre de fils 2
- Type de sonde Sondes thermistances tubulaires
- Température minimale du processus -80 °C
- ID de série ON-910-ON-970
- Matériau de la gaine Acier inoxydable 304
- Type de sonde de température Sonde à immersion
- Type de capteur de température Thermistance
- Température maximale de résistance de la Thermistance 70 °C
- Température minimale de résistance de la thermistance 0 °C
Ces capteurs à thermistance sont conçus pour les applications où le capteur doit être immergé dans un processus et monté à l'aide d'un filetage de montage 1/8NPT. Le capteur à thermistance de précision est protégé par une gaine en acier inoxydable de la série 300 et dispose de fils d'extension isolés en PFA ou PVC.
PDF & Manuels
Afficher les évaluations et les avis
Rated 4 out of
5
by
Woody from
Equipment is good. Shipment not so much
The thermistor works very well and is of good quality. It does not make any sense that it is shipped without a data sheet or the tables to convert the resistance readings to temperature. You need to search this website for the tables in order to use it.
Date published: 2019-06-19
Rated 4 out of
5
by
sedd from
wiring is not heavy gauge
The thermister is as shown in pictures. the wiring is very light gauge and there is no good way to provide strain relief past the threaded fitting. extending the tube thru the fitting and over the wiring would allow use of heat shrink or hose strain relief. I have ordered a unit without the fitting and will use compression fitting over the tube instead of the fitting.
Date published: 2019-01-30
Is the interchangeability of these thermistors (ON-970-XXXXX) specified at a particular confidence level (95%, 99%, etc)?
Hi ConnerZ,
Thank you for the inquiry. We do not offer confidence level as a specification on this series unfortunately. The sensor specification page gives expected temperature drift over 10 and 100 month periods.
https://assets.omega.com/spec/44000_THERMIS_ELEMENTS.pdf
Best regards
OMEGA
Date published: 2025-02-03
I just received a shipment of ON-970-44033. Where can I find the Steinhart-Hart coefficients for these probes?
Thank you for your inquiry rphilip. Please review the document from this link which has those coefficients: https://assets.omega.com/spec/44000_THERMIS_ELEMENTS.pdf
Date published: 2023-07-06
What is the time constant for the ON-970-44033?
Thank you for your inquiry! The time constant is 63% of the final value with a response time of 25 seconds or less.
Date published: 2021-05-08