1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-USB-TEMP
Eight Channel Temperature/Voltage Input USB Data Acquisition Modules
Choisir une variante
Nombre de canaux, entrée
Signal de sortie
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Approvisionnement Remarque | Power Supply Voltage (Supplied by USB Port): 4.75V min to 5.25V maximum, Power Supply Current (Supplied by USB Port): <100 mA typical (USB enumeration); 270 mA typical for continuous input with all inputs configured for disabled mode (500 mA for OM-USB-5201) User 5V Output Voltage Range (connected to self-powered hub): 4.75V min to 5.25V maximum User 5V Output Current (bus powered and connected to self-powered hub);10 mA maximum |
| CMRR | Thermocouple inputs, 100 dB min |
| Calibre du fil | 30 to 16 AWG |
| Configuration d'entrée | Connected Software |
| Connexion électrique | Screw Terminal |
| Conversion A/N | Four dual 24-bit sigma delta A/D converters |
| Courant de fuite | 105 nA |
| Entrée numérique | Digital: Low = –0.5 to 0.8 Vdc |
| Fréquence d'échantillonnage | 2 Hz (2 updates/second) |
| Hauteur | 36 mm |
| Humidité relative | 0 to 90% RH non-condensing |
| ID de série | OM-USB-TEMP-Series |
| Impédance d'entrée | Thermocouple inputs; 5 GΩ (power on), 1 MΩ (power off) |
| Interface de données | Ethernet, USB 1.1, USB 2.0 |
| Isolation | Power Isolation: 500 Vdc minimum measurement system to PC, Input Isolation: 500 Vdc min between field wiring and USB interface |
| Largeur | 89 mm |
| Longueur | 127 mm |
| Longueur du câble USB | 3 m |
| Nombre de canaux, entrée | Temperature: 8 DIFF, Digital: 8 |
| Nombre de canaux, sortie | Digital: 8 |
| Paramètres de configuration | Pull-Up/Down Configuration, User-Configurable Input/Output |
| Poids | 182 g |
| Précision | ± 0.25 °C |
| Remarque sur l'interface de données | Configuration Method: TracerDAQ Software;Supported Operating System: Microsoft Windows® VISTA/7/8/10 (32-bit and 64-bit) |
| Remarque sur la tension d'entrée | Absolute Maximum Input Voltage: Thermocouple Inputs; ±25V (Power On), ±40V (Power Off): Voltage Inputs; ±25V (Power On), ±15V (Power Off) |
| Remarque sur le type d'entrée | Thermocouple: J, K, T, E, R, S, B, N, RTD: pt100, 2, 3 or 4-wire DIN 43760, a = 0.00385, SAMA, a = 0.003911, ITS-90/IEC751, a = 0.0038505, Thermistor: 2, 3 or 4-wire standard 2252 through 30,000 Ω, Semiconductor Sensor: TMP36 or equivalent |
| Remarque sur les E/S analogiques | Analog Input Note: A/D Converter;Four dual 24-bit sigma delta A/D converters;Input Isolation: 500 Vdc minimum between field wiring and USB interface;Number of Channels;OM-USB-TEMP-AI: 8 differential temperature inputs;Thermocouple Input: Software programmable for type J, K, T, E, R, S, B, N;Pt100 RTD Input: 2, 3 or 4-wire DIN 43760, a = 0.00385, SAMA, a = 0.003911, ITS-90/IEC751, a = 0.0038505;Thermistor Input: 2, 3 or 4-wire standard 2252 through 30,000 Ω;Semiconductor Sensor: TMP36 or equivalent;Maximum Input Voltage;Temperature inputs; ±25V (power on), ±40V (power off): voltage inputs; ±25V (power on), ±15V (power off);Throughput Rate: 2 samples/sec max for all active channels;Input Impedance: Temperature inputs; 5 GΩ(power on), 1 MΩ (power off): voltage inputs; 10 GΩ(power on), 2.49 KΩ(power off);Input Leakage Current;Thermocouples inputs; 105 nA maximum (with open thermocouple detection enabled), 30 nA maximum (with open thermocouple detection disabled): voltage inputs; ±1.5 nA typ, ±25 nA max; |
| Remarque sur les E/S numériques | DIGITAL I/O Number of Digital I/O Channels: 8 Type: CMOS Configuration: Each DIO bit can be independently configured for input or output; power on reset is input mode Pull-Up/Pull-Down Configuration:All pins pulled up to 5V via 47 kΩresistors (default). Pull-down to ground (GND) also availableDigital I/O Transfer Rate (Software Paced):Digital Input: 50 port reads or single bit reads per second (typical) Digital Output: 100 port writes or single bit writes per second (typical) Input High Voltage: 2.0V min, 5.5V absolute max Input Low Voltage: 0.8V min, -0.5V absolute min Output High Voltage: 0.7V max (IOL = 2.5 mA) Output Low Voltage: 3.8V min (IOH = -2.5 mA);Transfer Rate: Digital: Input: 50 port reads or single bit reads per second (typical), Output: 100 port writes or single bit writes per second (typical) |
| Résistance de pull-down | 47 kΩ |
| Résistance de rappel | 47 kΩ |
| Signal de sortie | Numérique |
| Sortie numérique | <100 mA typical |
| Temps de chauffe | 30 min |
| Température de fonctionnement, max | 50 °C |
| Température de fonctionnement, min | 0 °C |
| Température de stockage, max | 85 °C |
| Température de stockage, min | -40 °C |
| Tension d'alimentation | 5 Vdc |
| Type d'entrée | Thermocouple, RTD, Thermistor, Diode, Digital |
| Valeur brute du poids | 1.11 |
| Échelle d'entrée de fréquence | 1 MHz |
| Pays d'origine | Hungary |
| Voir toutes les spécifications | |
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 5 out of
5
by
Javier Canete from
Good Experience
I bougth some product since a lot of year and the quality and experience are very good.
Date published: 2018-06-27
Rated 5 out of
5
by
Michael T from
Extremely Easy to Use
Easy to use. Just wired up my thermistors and downloaded TracerDAQ and everything was super easy to set up. Would recommend
Date published: 2022-01-04