1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LC8300
Cellules de charge à compression à trou traversant de 3 po de diamètre extérieur
- Étalonnage traçable NIST en 5 points avec données d'étalonnage du shunt
59 kOhm - Profil bas
- Construction entièrement en acier inoxydable
- Conception industrielle robuste
LC8300
À partir de
C$
1,303.84
Aperçu du produit
- Étalonnage en 5 points 0%; 50%; 100%; 50%; 0%
- Longueur du câble 5 ft
- Option d'étalonnage 5 POINTS NIST
- Connexion électrique Câble
- Puissance électrique 2 mV/V
- Type de force Compression
- Déviation à pleine échelle 0.003 in
- Hauteur 1 in
- Résistance d'entrée 360 Ω min
- Linéarité ± 0,5 %
- Type de cellule de charge Trou traversant
- Matériaux Acier inoxydable 17-4 PH
- Température de fonctionnement, max 121 °C
- Température de fonctionnement, min -54 °C
- Diamètre extérieur 3 in
- Résistance de sortie 350 ± 5 Ω
- Surcharge, max 300 % FS
- Température maximale du processus 71 °C
- Température minimale du processus 16 °C
- Répétabilité ± 0,1 %
- Surcharge sécurisée 150 % FS
- ID de série LC8300
- Approvisionnement Remarque 10 VCC, 15 VCC maximum
- Tension d'alimentation 10 Vcc
- Effet de la plage thermique ± 0,018 % lecture/°C
- Effet thermique zéro ± 0,009 % FSO/°C
- Tableau de câblage/connecteurs Vert : sortie (+) ; blanc : sortie (−) ; noir : entrée (−) ; rouge : entrée (+)
- Erreur de zéro/équilibre ± 2 %
La cellule de charge annulaire de la série LC8300 est une solution économique pour les applications nécessitant une conception à trou traversant. Avec son profil extrêmement bas et sa conception compacte, cette cellule de charge est idéale pour des applications telles que les forces de serrage, les forces de chargement des boulons et autres charges de compression. Cette série, avec sa construction entièrement en acier inoxydable et sa protection environnementale, a fait ses preuves en matière de fiabilité dans les applications industrielles difficiles.
PDF & Manuels
Afficher les évaluations et les avis
I have an application for this model which consist in 3 load cells connected to a J-Box 4800 which will be 100ft away. Can I use Wire nuts or terminal blocks to bond the load an extension?
Thank you for your question, please feel free to email us directly at pressure@omega.com so we an better understand your application.
Date published: 2020-01-22
Are LC8300 Series Load Cells available with longer cables 10?, 15ft?
Yes, we are able to customize the cable length. Thank you for your question!
Date published: 2020-01-22
apart from:"This series, with its all stainless steel construction and environmental protection, has proved reliable in tough industrial applications." Is there an equivalent NEMA/IP enclosure rating or similar humidity or wet locations guidance
Thank you for you question.
You may request this with submersible cable or submersible connector to avoid water splashes getting from the electrical termination.
Date published: 2020-09-22
Does the load need to be evenly distributed across the face for accurate measurement? Or can the load contact only one side of the face?
Thank you for your inquire.
The load needs to be evenly distributed on the inner ring.
Date published: 2022-12-09
I need a LC8300-150-10K with 15ft long cable, is there a specific part # for such cable length?
Yes. You can get a LC8300-1.50-10K load cell with an extra long cable but this would have to be a custom quotation. Please contact Omega info@omega.com for a quote. Typical lead time for a custom variant of this load cell would be 8 weeks ARO.
Date published: 2020-04-29
Can you explain how best to apply a load to this specific model? I have been using a 2.25" ball bearing to rest on the sensing area of the load cell and applying a load with a reference standard.
Thank you for your inquire
Please contact us directly so we can discuss in detail.
There are to many variables to give a simple answer.
Hope this was helpful
Date published: 2020-05-07
Needed for a USACE job. Are these acceptable for the Buy American Act?
The LC8300 through-hole load cells are are made in the USA
Date published: 2020-03-23