1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LAQ
OMEGALAQ Liquid Temperature Indicating Lacquers
Modèles en stock
- Easy to Use
- Temperature Ranges from 79 C (175F) to 1093C (2000F)
- Fast Response Time
LAQ
Depuis
C$
14.50
Modèles en stock
L'aperçu du produit
OMEGALAQ™ Liquid LAQ Series uses the same material as used in OMEGAMARKER™ in lacquer suspension. Lacquer serves a transport function only. OMEGALAQ™ may be thinned to ensure workable consistency. Thinning OMEGALAQ™ will not affect its accuracy. Order GREEN LABEL THINNER.
To use, simply shake or stir to a uniform consistency and apply a thin smear to the working surface before heating begins. It dries almost instantly to a mark. When the stated temperature is reached on subsequent heating, this mark liquifies sharply. A melted OMEGALAQ™ coating does not revert to its original dull-opaque appearance but remains glossytransparent which makes subsequent interpretation a simple matter.
To use, simply shake or stir to a uniform consistency and apply a thin smear to the working surface before heating begins. It dries almost instantly to a mark. When the stated temperature is reached on subsequent heating, this mark liquifies sharply. A melted OMEGALAQ™ coating does not revert to its original dull-opaque appearance but remains glossytransparent which makes subsequent interpretation a simple matter.
Afficher les notes et les avis
How can I imagine the process exactly? Once the limit temperature is reached, the consistency changes? Is there also a color change or is the substance then only transparent as described in the data sheet?
Thank you for your inquiry Laserdrilling123. At the start, apply a thin smear to the working surface before heating begins. It dries almost instantly to a mark. When the stated temperature is reached on subsequent heating, this mark liquifies sharply. A melted OMEGALAQ™ coating does not revert to its original dull-opaque appearance but remains glossy transparent which makes subsequent interpretation a simple matter. There is no color change.
Date published: 2024-04-26
I need this product for a ultrfast laser drilling process with stainless steel, so that you only have a very short temperature rise and then it drops directly down to room temperature. Can this temperature still be identified?
Thank you for your inquiry. This item has a very fast response time and will react as soon as the temperature value has been reach or exceeded.
Date published: 2021-03-23
What is the accuracy of the stated temperatures? Are there tolerances associated with each product type?
Thank you for your inquiry. The tolerance is ±1% of value.
Date published: 2021-04-15
Does this product work the same in an inert gas as it does in air? Does it work the same in a mild vacuum (~ 200 mTorr)? Will it outgas and form deposits in a vacuum chamber?
Thank you for your inquiry. OMEGA LAQ cannot be used in any vacuum environment.
Date published: 2020-11-16
I am trying to create a waste log and need the density of this product, is it available?
Thank you for your inquiry. Unfortunately we do not have a density specification for this product.
Date published: 2021-12-14
Is OMEGALAQ oil resistant? I would like to use it on the races of a high speed ball bearing.
Hi Gerschman
Thank you for the inquiry. The LAQ material is not oil resistant.
Best regards
OMEGA
Date published: 2020-09-28
What is the electrical conductivity of the laquer?
Hi John22,
Thank you for the inquiry. This product has not been evaluated for electrical conductivity.
Best regards
OMEGA
Date published: 2022-05-02
Do the lacquers react differently depending on the gas environment they are in? I.e. oxygen, nitrogen,...
Hi Clair,
Thank you for the inquiry. The LAQ series were verified in standard conditions (STP) air environment. You would need to test to verify in alternate conditions, gases, pressures, etc.
Best regards,
OMEGA
Date published: 2023-10-07