1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HPS-HT
Sondes thermocouples de surface à haute température portatives
Modèles en stock
- Étalonnages de thermocouples de type K, E ou J
- Le type K mesure la température jusqu'à 1100°C (2000°F)
- Connecteur mâle miniature SMP en terminaison à l'extrémité du cordon rétractable
- Sonde de 12 po standard. Autres longueurs disponibles.
HPS-HT
À partir de
C$
356.28
Modèles en stock
Aperçu du produit
- Longueur du câble 60 in
- Code couleur standard ANSI
- Connexion électrique Connecteur thermocouple mâle miniature
- Matériau de la poignée Aluminium
- Température maximale de la poignée 70 °C
- Température minimale de la poignée 0 °C
- Isolation TPE
- Diamètre de la sonde 0.44 in
- Type de sonde Sonde de surface
- Température minimale du processus 0 °C
- ID de série HPS-HT
- Matériau de la gaine Acier inoxydable 304
- Type de sonde de température Sonde de surface
- Type de capteur de température Thermocouple
- Calibre du fil 28 AWG
La sonde de surface haute température d'OMEGA est équipée d'un élément de détection à ressort en alliage thermocouple pour garantir des lectures cohérentes. La sonde de 30 cm est livrée avec un connecteur mâle SMP et un câble de capteur rétractable de 0,3 mm (1 ft.) (s'étire jusqu'à 1,5 m (5 ft.)). Disponible en thermocouples de type J, K ou E, la sonde HPS-HT peut mesurer des températures allant jusqu'à 1 100 °C (2 000 °F), type K uniquement.
PDF & Manuels
Afficher les évaluations et les avis
Rated 2 out of
5
by
frechem from
Didn't last long.
The coil broke after just a few uses. Sent it back for repair and was told it wouldn't be able to be repaired and there is no warranty. I was offered a 10% discount to buy a new one.
Date published: 2016-03-03
Rated 5 out of
5
by
Gerry from
Easy to use and comfortable! Omega does it again!!
Easy to use and comfortable! Omega does it again!!
Date published: 2023-03-30
What is the Accuracy of this probe model type K HPS-HT-K12SMP-M ?
The HPS-HT probes would adhere to the Standard Limits of Error specification with the orientation of the probe to the surface being extremely important to meet the specification. This probe being type K should be +/- 2.2 C or 0.75% of reading whichever is greater from 0/1250 C.
Date published: 2020-06-17
What is the Accuracy of these units?
The HPS-HT probes would adhere to the Standard Limits of Error specification with the orientation of the probe to the surface being extremely important to meet the specification
Date published: 2020-06-17
Question regarding the correct means of using the probe. Is it required to merely rest the probe tips on the surface, while ensuring full contact. Or must downwards pressure be exerted to the point where the outer sheath contacts this surface also?
Thank you for your inquiry. The HPS-HT Series surface probe has a spring-loaded sensing element where you basically apply some gentle pressure on the tip of the probe to get a temperature reading.
Date published: 2024-02-28