1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FST1000-Series
Economical Air Flow Switch With High/Lo Alarms
Interrupteur de Débit d'Air Economique- Air Velocity Range up to 10,000 FPM (50.8 m/sec)
- 2% Full Scale Accuracy
- Two Sensor Probe Configurations (Fixed and Remote)
- Hot Wire Air Velocity Sensor Design
FST1000-Series
From
C$
717.23
Product Overview
- Accuracy ± 2 %
- Accuracy Detail Accuracy: 2% FS (air velocity)
- Additional Features 1
- Alarm Deadband 0.05
- Electrical Connection Screw Terminal
- Height 3.5 in
- Length 1.25 in
- Linear Flow Rate, Min 0 FPM
- Materials 304 Stainless Steel
- Media Compatibility HVAC / room air
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Probe Diameter 0.25 in
- Probe Length 12 in
- Process Connection Size 1/4 in
- Process Connection Type Compression Fitting
- Process Temperature, Max 93 °C
- Process Temperature, Min -40 °C
- Response Time 250 msec
- Series ID FST1000-Series
- Supply Power Note 15 to 24 Vdc @ 200 mA
- Supply Voltage 15 to 24 Vdc
- Switch Rating 10 A
- Switch Rating Note 2 SPST, 10A @ 24 Vdc, 10A @ 250 Vac (Resistive)
- Switch Type SPST NO
- Weight 5.6 oz
- Width 2 in
La série FST1000 mesure la vitesse de l'air et fournit deux fermetures de contact d'alarme SPST correspondant aux points de consigne d'alarme haute et basse. Les points de consigne d'alarme sont réglables de 0 à 100 % de la plage de débit d'air. L'appareil est équipé d'une LED verte d'alimentation et de deux LED rouges pour les indications d'alarme haute et basse. Ils peuvent être utilisés dans les laboratoires de recherche et développement, les applications CVC, les hottes d'échappement/ventilation et d'autres processus de fabrication. La conception du capteur est basée sur des éléments RTD ; la vitesse de l'air est mesurée par la perte de chaleur du capteur RTD lorsqu'il est refroidi par le débit d'air. La sonde du capteur est disponible en deux configurations : montage fixe et sonde à distance.
PDFs & Manuals
Show Ratings & Reviews
Is this product reliable in a dusty enviroment? I mean I am wanting to monitor the air flow in the exhaust system for powder coating, and there will be fine dust particles in this ducting. Can the sensor be placed in this stream, needs to be placed after
Thank you for your inquiry about the air flow switch. Unfortunately, due to the dust particles you mentioned, it will affect the reading since a coating can occur. Best to place after in an area with no debris or suspended particles.
Date published: 2021-12-09
What is the Area Classification of the switch? Can it be installed in the intake of the Blower with odorous air and will be in Class 1, Div 1 area? can it have adjustable setting of air flow threshold? What is before and after pipe requirements ?
Unfortunately, this switch is not rated for hazardous environments, and we do not recommend using the sensor for this application.
Date published: 2024-12-29