1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
EWS-WALL-MNT-ALL
Capteurs environnementaux, à fixation murale
Modèles en stock
- Modèles de capteurs thermocouple, RTD ou thermistor
- Modèles d’émetteurs de température, température/humidité et pression barométrique
- Conception miniature à faible coût
- Design élégant s’intégrant bien à la décoration de votre bureau, salle informatique ou laboratoire
EWS-WALL-MNT-ALL
À partir de
C$
155.08
Modèles en stock
Aperçu du produit
- Matériau du boîtier ABS
- Hauteur 45 mm
- Longueur 79 mm
- Montage Montage mural
- ID de série EWS-WALL-MNT-ALL
- Largeur 54 mm
Les capteurs environnementaux à faible coût d'OMEGA Capteurs muraux maintiennent votre bureau, la salle informatique ou le laboratoire . Ils sont compatibles avec la plupart des compteurs, régulateurs, enregistreurs, enregistreurs de données et systèmes d'acquisition de données . Les modèles à thermocouple, RTD et thermistance sont fournis avec des fils de 1 m (40"). La température, l' température/humidité et pression sont fournis avec des unités standard, sélectionnable par l'utilisateur de 4 à 20 mA ou 1 à 5 Vcc.
Remarque : la série EWS est destinée à une utilisation en intérieur uniquement. Elle n'est pas conçue pour être exposée à la pluie, à la neige ou à d'autres conditions météorologiques extrêmes.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
GregO123 from
It works great!
The documentation is a bit confusing as it is for a slightly different version than the one I bought (barometric pressure) but was easy enough to figure out. Overall the device works well and is very reliable. We have several of them. It would be nice if they came with a cal cert, but again, it is easy enough to get the device certified.
Date published: 2025-10-31
Rated 5 out of
5
by
Derek B from
As expected!
Delivered and working as expected. Installation was smooth with no issues.
Date published: 2025-01-13
Rated 5 out of
5
by
Anonymous from
Best value for space temperature monitoring
A clean, simple & cost-effective wall mount sensor
Date published: 2022-11-15
Rated 2 out of
5
by
bob1 from
Not even close
I've installed one of these so far. It read 84 F. I checked it with two accurate (expensive) and they both read 71 F. Apparently I need to calibrate it.
I hope the rest are a little closer.
Date published: 2016-03-18
Rated 1 out of
5
by
IBS Guy from
Troublesome Product
Constantly read high. Was told by customer support that the unit could handle 18 volts DC maximum despite the fact that the documentation said 24. Changed to a 15 volt supply and still had the same problem. Used a heat gun on the unit and noticed the board had a 90° hot spot on it. Maybe the RTD was picking some of that up. In the end I went with something else.
Date published: 2016-03-14