Need assistance? Call us: 1-800-663-4209
CN1A-Series
1/16 DIN On-Off Temperature Controller with Clear LCD Display
Contrôleur de température On-Off 1/16 DIN avec affichage LCD clairPlease see CN7200-7500-7600-7800 as a possible alternative. Contact Engineering if you have any questions.
- Dual Outputs
- User Selectable Input from 4 Thermocouple Types or RTD Input
- 10 Programmable Alarm Options
- Reverse (Heat) or Direct (Cool) Control
CN1A-Series
From
C$
470.99
Product Overview
- Additional Features 1 Alarm Output
- Control Output SPDT Relay
- Cutout Dimensions 45 x 45 mm
- Display Type 2.5 Digit LCD
- Form factor 1/16 DIN
- Height 48 mm
- Length 89 mm
- Measurement Type Temperature
- Memory Backup EEPROM
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min -10 °C
- Output Detail Mechanical Relay;SPDT relay, rated @ 3 A, 240 Vac;Alarm Output-SPST N.O. relay, rated @ 3 A, 240 Vac
- Output Signal None
- Series ID CN1A-Series
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -20 °C
- Supply Power Note 10 to 32 Vac/Vdc @ 60 mA maximum, 90 to 260 Vac, 50/60 Hz @ 1.5 Va maximum
- Weight 205 g
- Width 48 mm
La série CN1A est une gamme de régulateurs de température numériques tout ou rien conçus pour offrir les fonctionnalités des régulateurs PID à usage général, mais à un prix adapté aux applications tout ou rien. La programmation simple à l'aide de deux touches sur le panneau avant, l'affichage LCD clair et les fonctions de contrôle et de programmation d'alarme simples ont permis au CN1A d'être largement utilisé dans diverses applications. Pour ajouter une minuterie à votre panneau, le PTC-1A associé est conçu pour combiner une apparence harmonisée avec des fonctions simples, flexibles et d'une grande fiabilité. Le CN1A, lorsqu'il est associé à la minuterie complémentaire PTC-1A, est idéal pour les applications fréquentes réglables par l'utilisateur, telles que l'impression à chaud, le scellage de fenêtres et les fours environnementaux, qui nécessitent souvent un contrôle à la fois de la température et du temps.
Show Ratings & Reviews
Rated 1 out of
5
by
W Clay from
1/16 DIN On-Off LCD Temperature
I will never buy this instrument again. The thermocouple units will not hold a stable temperature. I am seeing drifts of more than 20 deg C. I bought 5 units and they all behave the same way. If I unplug the thermocouple and plug it in again or replace it with another thermocouple I get totally different Temperature readings. If I turn off the power and restore it again I get different readings. I buy many instruments from Omega with no issue but I am very disappointed in this model.
Date published: 2021-04-07
Will this controller read a type K thermocouple at liquid Nitrogen temperature (approximately -200C)? Data sheet suggests it only accepts an input range to -99C, regardless of sensor type.
This on/off controller does not have the capability of reading temperatures below -99C.
Date published: 2022-11-22
Do you make a controller to heat compressed air to 37 degrees Centigrade for constant flow applications?
Thank you the inquiry. We have some solutions for this type of application. Please email HEATERS@OMEGA.COM or call 800-359-1660 and select temperature pre-sales.
Best regards
OMEGA
Date published: 2020-07-25
What kind of power supply does this accept?
Thank you for your inquiry. The voltage supply this controller needs is 90 to 260 Vac, 50/60 Hz @1.5 Va maximum.
Date published: 2024-06-06
Can you please provide details on which types of connections this accepts for thermocouples, and input/output wires?
The CN1A-RTD would use a Female wire quick disconnect terminal for 18 to 22 AWG wire.
Date published: 2023-09-08
Is the electrical connection a simple screw terminal?
Thank you for your inquiry! Yes, the connections will be simple screw terminals but the socket (CN1A-SOCKET) listed under accessories will be needed.
Date published: 2021-04-08