1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
BARE-SH-DH-OV-ELEMENTS
Éléments de thermocouple à perles en céramique
Modèles en stock
- Disponible en thermocouples de type J, K, T et E
- Isolants céramiques haute température pour résister à des températures supérieures à 2000 degrés F
- Longueur standard de 12" avec d'autres longueurs disponibles
BARE-SH-DH-OV-ELEMENTS
À partir de
C$
31.12
Modèles en stock
Aperçu du produit
- ID de série BARE-SH-DH-OV-ELEMENTS
Les éléments thermocouples à billes en céramique sont disponibles en types J, K, T et E. Ils sont dotés d'isolants en céramique haute température qui résistent à des températures supérieures à 2000 °F. La longueur standard est de 12 pouces, mais des longueurs personnalisées sont disponibles. Idéal pour une utilisation avec ou sans tubes de protection et têtes de connexion dans des applications à haute température.
PDF & Manuels
Afficher les évaluations et les avis
Rated 3 out of
5
by
Eng guy from
Ceramic beaded wire TC
Some beads are discolored, wires are correct lengths
Date published: 2025-06-10
Are these thermocouples made of operation at high temp and high vacuum simultaneously? I operate an accelerator beam line and we are having issues with sublimation of thermocouple wires in high vacuum.
Hi Cecchini,
Thank you for the inquiry. Type K has limited use in vacuum/reducing environments. Type N will give better performance.
Best regards
OMEGA
Date published: 2023-08-13
Using the 4003 temperature controller manual explain steps taken to configure it for type k thermocouple
Thank you for your inquiry. Yes it does include the programming information.
Date published: 2020-02-12
Hello, I would like to measure the cooling rate of a casting (the thermocouple will be in contact with the molten material and will be keep it there during the solidification process). Could you recommend a thermocouple to perform this task?
You may be able to use a sheathed Thermocouple rated in temperature above the melting point of your casting material. Ideally using non-contact IR sensors would be the best approach Omega would suggest. Send an email to temp@dwyeromega.com to have questions answered regarding your application.
Date published: 2024-09-23