1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
1PT100G-RTD-ELEMENTS
Glass Wire Wound Platinum RTD Elements
Éléments RTD en platine enroulés de fil de verre
Models In Stock
- Suitable for Low or very High Temperatures
- Tolerant of Thermal Shocks
- Good Vibration Resistance
- Alpha = 0.00385
1PT100G-RTD-ELEMENTS
From
C$
110.15
Models In Stock
Product Overview
- Accuracy Class B
- Accuracy Detail Class B per IEC60751
- Air Velocity, Max 1 m/s
- Nominal Resistance 100 Ω
- Series ID 1PT100G-RTD-ELEMENTS
- Temperature Coefficient 0.00385Ω/Ω/°C
- Temperature Sensor Type RTD
- Water Velocity, Max 0.4 m/s
Les éléments RTD en verre à bobinage platine sont fabriqués en enroulant du fil de platine autour d'un noyau en verre, puis en fusionnant l'extérieur avec du verre. Ils conviennent aux températures basses ou très élevées et peuvent résister aux chocs thermiques. Ils offrent une bonne résistance aux vibrations (selon la méthode de montage) et, à l'exception du modèle GX, peuvent être directement immergés dans des milieux liquides.
PDFs & Manuals
Show Ratings & Reviews
What is the recommended lead wire that we would use with these RTDs? How would the lead wires connect to the RTD leads? If we used a 3 meter (9.8 ft) lead to a meter for measuring how would this effect the temperature reading?
You will need to use RTD extension wire. You can use silver solder to connect the extension wire to the leads.
Date published: 2019-08-18