1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LAQ
OMEGALAQ Laques indicatrices de température des liquides
Modèles en stock
- Facile à utiliser
- Plages de température de 79 °C (175 °F) à 1093 °C (2000 °F)
- Temps de réponse rapide
LAQ
À partir de
C$
43.07
Modèles en stock
Aperçu du produit
- Précision ± 1 %
- Température maximale du processus 2000 °F
- Température minimale du processus 0 °F
- Temps de réponse 0,001 s
- ID de série LAQ
- Mesure de la température, min 0 °F
- Volume 2 oz
La série OMEGALAQTM Liquid LAQ utilise le même matériau que celui utilisé dans OMEGAMARKERTM en suspension de laque. La laque sert uniquement à faciliter le transport. OMEGALAQTM peut être dilué pour obtenir une consistance facile à travailler. La dilution d'OMEGALAQTM n'affecte pas sa précision. Commandez le DILUANT GREEN LABEL.
Pour l'utiliser, il suffit de le secouer ou de le remuer jusqu'à obtenir une consistance uniforme, puis d'en appliquer une fine couche sur la surface de travail avant de commencer le chauffage. Il sèche presque instantanément pour former une marque. Lorsque la température indiquée est atteinte lors du chauffage, cette marque se liquéfie rapidement. Une fois fondu, le revêtement OMEGALAQTM ne reprend pas son aspect opaque et terne d'origine, mais reste brillant et transparent, ce qui facilite son interprétation ultérieure.
Pour l'utiliser, il suffit de le secouer ou de le remuer jusqu'à obtenir une consistance uniforme, puis d'en appliquer une fine couche sur la surface de travail avant de commencer le chauffage. Il sèche presque instantanément pour former une marque. Lorsque la température indiquée est atteinte lors du chauffage, cette marque se liquéfie rapidement. Une fois fondu, le revêtement OMEGALAQTM ne reprend pas son aspect opaque et terne d'origine, mais reste brillant et transparent, ce qui facilite son interprétation ultérieure.
Afficher les évaluations et les avis
How can I imagine the process exactly? Once the limit temperature is reached, the consistency changes? Is there also a color change or is the substance then only transparent as described in the data sheet?
Thank you for your inquiry Laserdrilling123. At the start, apply a thin smear to the working surface before heating begins. It dries almost instantly to a mark. When the stated temperature is reached on subsequent heating, this mark liquifies sharply. A melted OMEGALAQ™ coating does not revert to its original dull-opaque appearance but remains glossy transparent which makes subsequent interpretation a simple matter. There is no color change.
Date published: 2024-04-26
I need this product for a ultrfast laser drilling process with stainless steel, so that you only have a very short temperature rise and then it drops directly down to room temperature. Can this temperature still be identified?
Thank you for your inquiry. This item has a very fast response time and will react as soon as the temperature value has been reach or exceeded.
Date published: 2021-03-23
What is the accuracy of the stated temperatures? Are there tolerances associated with each product type?
Thank you for your inquiry. The tolerance is ±1% of value.
Date published: 2021-04-15
Does this product work the same in an inert gas as it does in air? Does it work the same in a mild vacuum (~ 200 mTorr)? Will it outgas and form deposits in a vacuum chamber?
Thank you for your inquiry. OMEGA LAQ cannot be used in any vacuum environment.
Date published: 2020-11-16
I am trying to create a waste log and need the density of this product, is it available?
Thank you for your inquiry. Unfortunately we do not have a density specification for this product.
Date published: 2021-12-14
Is OMEGALAQ oil resistant? I would like to use it on the races of a high speed ball bearing.
Hi Gerschman
Thank you for the inquiry. The LAQ material is not oil resistant.
Best regards
OMEGA
Date published: 2020-09-28
What is the electrical conductivity of the laquer?
Hi John22,
Thank you for the inquiry. This product has not been evaluated for electrical conductivity.
Best regards
OMEGA
Date published: 2022-05-02
Do the lacquers react differently depending on the gas environment they are in? I.e. oxygen, nitrogen,...
Hi Clair,
Thank you for the inquiry. The LAQ series were verified in standard conditions (STP) air environment. You would need to test to verify in alternate conditions, gases, pressures, etc.
Best regards,
OMEGA
Date published: 2023-10-07