1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
IF-001-Interface
Omega Link Modbus Compatible USB Serial to Smart Probe Interface
Modèles en stock
- USB 2.0 to Smart Probe Interface
- 2-meter length cable
- Sync by Omega and Omega Enterprise Gateway support
- Modbus RTU, Modbus ASCII compatible
IF-001-Interface
Depuis
C$
107.53
Modèles en stock
L'aperçu du produit
- Approvals CE
- Cable Length 2 m
- Electrical Connection M12 8 pin Female
- Enclosure Ratings IP67, NEMA Type 6
- Enclosure Ratings Note NEMA 6, IP67 (M12 end only)
- Number of Channels 1
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -20 °C
- Setup Controls Supports USB PnP setup and SYNC configuration software
- Software Compatibility Windows 10 OS or higher. Compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks
- Supply Current 100 mA
- Supply Power Note USB Powered. Supplies up to 100 mA to sensor
- Supply Power Type USB
- Vibration 10 Gs at 10 Hz to 500 Hz (M12 end Only)
The Omega IF-001 Smart Interface cable provides an easy way to configure and monitor Omega Smart Probes. The USB 2.0 compliant device appears as a serial port and is compatible with Windows, iOS, and Linux.
The IF-001 provides a Modbus RTU or Modbus ASCII interface to the entire smart sensor register set.
An integrated command line interface allows for quick smart sensor register configuration and monitoring using standard terminal emulators. The 8-pin M12 connector provides 3.3 Vdc power for external Smart Sensor probe with an integrated power monitor to protect against short circuits.
PDF et manuels
Logiciels et pilotes
Afficher les notes et les avis
Rated 5 out of
5
by
Sohrab G from
Great for connecting a heat flux sensor to laptop
Easy to connect to alaptop to view heat flux data when connected to a sensor.
Date published: 2023-02-09