1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PX119
Transmetteurs de pression compacts de style OEM
Modèles en stock
- Compact et abordable pour les applications OEM
- Facilement configurable, désormais avec des options étendues
- Sorties fiables avec conditionnement du signal
- Boîtier durable en acier inoxydable résistant à la corrosion dans les environnements industriels difficiles
PX119
À partir de
C$
210.42
Modèles en stock
Aperçu du produit
- Précision ± 0.5 %
- Précision Précision de 0,50 % BFSL
- Température compensée, max 85 °C
- Température compensée, min 0 °C
- Matériau du boîtier Acier inoxydable 304
- Caractéristiques nominales du boîtier IP65
- Matériaux en contact avec le fluide Acier inoxydable 304, Alumine, Buna-N (NBR)
- Température de fonctionnement, max 135 °C
- Température de fonctionnement, min -40 °C
- Câblage de sortie (broche 1) Approvisionnement +
- Câblage de sortie (broche 2) Approvisionnement -
- Type de raccordement au process NPT mâle
- Protection Surtension, court-circuit, inversion de polarité
- Temps de réponse 1 ms
- ID de série PX119
- Stabilité <0,3 % FS>
- Tension d'alimentation 8 à 30 Vcc
- Poids 70 g
Les transmetteurs de pression compacts de la série PX119 offrent une précision de ±0,5 % et un temps de réponse rapide de 1 ms. Dotés d'un boîtier en acier inoxydable durable avec indice de protection IP65 et raccordement process mâle NPT, ils fournissent des sorties 4-20 mA fiables, idéales pour les applications OEM. Facilement configurables avec des options étendues, ces transmetteurs légers (70 g) offrent des performances économiques et résistantes à la corrosion dans les environnements industriels difficiles.
La pression sans les inconvénients
Idéal pour les applications de manutention, les équipements industriels et mobiles où un boîtier en acier inoxydable petit mais robuste est souhaité à un prix raisonnable. Le boîtier est usiné à partir d'une seule pièce d'acier inoxydable afin d'offrir une protection supplémentaire aux composants électroniques internes et d'empêcher la corrosion dans la plupart des applications. Un capteur céramique piézorésistif associé à un conditionnement de signal ASIC fournit une excellente sortie à compensation thermique.
Applications:
- Surveiller la pression/hauteur dans la suspension du véhicule
- Réguler le fonctionnement des portes pneumatiques
- Surveiller la charge excessive
- Surveiller le fonctionnement de l'ascenseur
- Surveiller la pression compacte
Accessoires
Amortisseurs de pression pour se protéger contre les variations de pression
Depuis C$27.12
0 En stock
accessories
Convertisseur compact de courant ou tension analogique vers IO Link
C$245.46 / each
98 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Accidental Gardener from
The Little Transmitter that could...
I collect rain water in a 1000 L tote tank to use for my Greenhouse & several raised-beds. A small pump is used to recirculate the water not only to prevent stagnation but also for pH treatment to make it ready for use. The pump is then used for water delivery to the Greenhouse & raised-beds to reduce domestic water usage. This transmitter is great to monitor how well the pumping system performs. From bench testing before installation, I was very impressed with the response, repeatability & accuracy of this little unit. This is great as it does not have any zero/span adjustments. The pump has a low pressure, moderate flow delivery & I'm using a 15 psig transmitter (PX119-015GI). The Mini-DIN connector is great for easy disconnection as I will be bringing the pump & transmitter inside for the winter after the grow season is over.
Date published: 2020-08-29
Rated 4 out of
5
by
dlyman from
Awesome
I needed a pressure transmitter and looked everywhere. I found very cheap to very expensive and long ship times. I ordered the Omega. I got it in 2 days and it has worked very well
Date published: 2018-05-14
Rated 4 out of
5
by
Chris at FTS from
Easy to Install and Use
We purchased several of these in three different ranges. The first item is the ease of wiring the connector. Previous transducers used required soldering the wires to the connector terminals. There units have a simple screw lug that you simply insert the lead and screw tight in place. The time involved was less than half to complete connections.
The transducers themselves work very well.
My only minor concern is that the terminals on the transducer are exposed and can be bent easily. However, since there should be minimal need to remove the transducer connector, this is not a big concern.
Date published: 2019-03-06
Rated 5 out of
5
by
Flaco from
Pressure Transmitter
This is a rugged little piece of equipment. I'ts accurate enough for what I'm doing, has held up to sub-optimal conditions and the price is unbeatable.
Date published: 2019-02-05
Rated 5 out of
5
by
Eve B from
great product
everything worked as expected, great product it exceeded my expectations.
Date published: 2026-02-19
Rated 5 out of
5
by
OLSD microgrid from
trouble free performance
compact yet versatile, very accurate measurements. High-quality stainless-steel housing, no adapters, just straight forward performance.
Date published: 2026-02-02
Rated 5 out of
5
by
Vhramirez90 from
Exhaust treatment
I purchased this sensor for use in a biogas engine exhaust treatment system. The sensor works great and shipped in a decent amount of time.
Date published: 2025-10-13
Rated 5 out of
5
by
radBerry from
Good product for the price. Fast Shipping
Used on a large die press to monitor multiple pressure points in the hydraulic system
Date published: 2025-06-23
I need to use this pressure sensor to get data from a pneumatics braking system on a small vehicle. We are using an arduino to collect data. Adruinos can measure between 0-5 V DC but it cannot measure current directly. Can it be used for this application?
Typically you would wire this sensor in series with a power supply and the device you are reading the signal with. If you install a 250 ohm resistor across the input terminal of the readout device the 4 to 20mA signal from the sensor will be converted to a 1 to 5VDC.
Date published: 2021-02-03
Are these National Sanitation Foundation (NSF) certified?
These pressure transducers are not NSF certified
Date published: 2019-12-31
CAD model available?
Hello, Omega's Tech Support has emailed you the PX119 CAD drawing for your review. Thanks for reach out to us and if you need further assistance please contact our Tech Support department.
Date published: 2019-04-17
Can the PX119 be used to measure hydraulic pressure? 2250 psi max
The PX119-3KGI will give a 4 to 20 mA output over a 0 to 3000 psig range. 2250 psi is 75% of this range so the output would be 16 mA. Please contact our Technical Support to discuss your application needs or if you need further assistance.
Date published: 2018-07-20
When we connect pressurized air to a PX119-150AI transducer, air is leaking out the back of the transducer around the electical connector. This is not the behavior we expected. Please explain why air pressure is leaking through the sensor.
The diaphragm has been damaged. Usually caused by overpressure of the sensor.
Date published: 2020-09-18
Is the 3D CAD available? I need info on the threads for the installation setup.
Thank you for your inquire.
We at this time do not have a 3D model.
The PX119 has a standard Process Connection: ¼ NPT male
Hope this was helpful
Date published: 2020-07-21
Can these transducers be install within a test article that is then placed within a pressure chamber; and have the pressure in the pressure chamber is to be increased up to 75 PSIA, while the transducer(s) monitor the pressures within the unit?
Hello, the PX119 will have a 1/8 NPT male threaded fitting at the bottom, which will thread into a Manifold or T fitting etc, the sensing element will be at the end of the orifice in the 1/8 NPT threaded port. The entire unit itself may not be subject to vacuum/pressure.
Your question/application is unclear, I would suggest calling and talking to our application specialists at 1800 622 2378.
Date published: 2024-11-04
For the PX109A-030A5V, which has a cable connection, is the recommended cable accessory (CA-319-4PC24-XXX-WP) necessary?
The CA-319-4PC24-XXX-WP is not necessary for the PX109A-030A5V transducer
Date published: 2024-04-24