1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LVP51
Capteurs de capacitance RF non intrusifs avec sélection NO ou NC
- Detects Liquid Through Plastic or Fiberglass Tank Walls Up to 1' Thickness
- 1 AMP SPST Relay Output Standard
- Sensor Conveniently Slides In and Out of Mounting Bracket In PE or PP
- Ideal For Many Ultrapure and Sanitary Applications
LVP51
Depuis
C$
517.58
L'aperçu du produit
- Précision ± 0.04 inH2O
- Approvals General purpose, CE
- Cable Length 1000 ft
- Dielectric Range 10 to 80 dielectric units @ 1 MHz
- Enclosure Ratings IP65, NEMA Type 4
- Indicator Type LED: Calibration and liquid status feedback
- Loop Resistance 600 Ω @ 24 Vdc
- Materials Plastic, Fiberglass
- Materials, Wetted Polypropylene
- Media Compatibility Clean process / cooling water, Oils / lubricants, Organic solvents
- Operating Temperature, Min -40 °C
- Power Consumption 25 mA
- Repeatability ± 0.04 inH2O
- Series ID LVP51
- Supply Power Type DC
- Supply Voltage 12 to 30 Vdc
- Switch Operation Selectable Normally Open or Normally Closed
- Switch Rating 1 A @ 60 or 120 Vac/Vdc
- Switch Type SPST
- Tank Wall Thickness 1 in
- Wire Gauge 22 AWG
OMEGA® non-intrusive RF capacitance sensors deliver accurate and reliable liquid level detection with an SPST mechanical relay output. A versatile weld-on fitting enables the sensor to be mounted directly to the wall of any standard polyethylene, fiberglass or polypropylene tank. Simply align the fitting with the tank and press it into place. An engineered adhesive holds the fitting during welding and provides a seal between the sensor and the tank wall. OMEGA’s two-step calibration feature ensures the highest level of dielectric sensitivity.
PDF et manuels
Afficher les notes et les avis
Can this sensor be modified to detect the difference between an aqueous and an organic solvent or can it only detect wet vs dry?
Unfortunately, no. You may want to look at continuous level monitors, such as ultrasonic for non-contact. https://www.omega.com/en-us/sensors-and-sensing-equipment/level/ultrasonic-sensor/p/LVU201A
Ultrasonics do have problems with fumes or foam. If this is the case then review:
https://www.omega.com/en-us/process-switches/level-switches/capacitance-and-conductivity-switches/p/LV3000-LV4000
Date published: 2019-06-26