1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DCT-Series
Pince angulaire pneumatique, conception compacte et espaces confinés
Pneumatic Angular Grippers, Compact Design & Confined Spaces- Automatisation modulaire hautement configurable — la technologie exclusive Direct Connect™ Robohand offre plusieurs options de montage
- Ouverture complète de la mâchoire (180°) permettant d’alimenter directement la pièce dans la pince, éliminant ainsi un mouvement supplémentaire
- Conception compacte pour une utilisation dans des espaces restreints
- Protection contre les copeaux pour une utilisation en environnements difficiles
DCT-Series
À partir de
C$
1,637.45
Aperçu du produit
- Type de cylindre Double effet
- Filtre 40 microns ou mieux
- Angle d'ouverture des mâchoires 180°
- Description du kit Kit de réparation d'étanchéité : Disponible ; Réparable sur site : Oui
- Durée de vie mécanique 5 millions de cycles
- Environnement opérationnel Valve requise pour fonctionner : 4 voies, 2 positions
- Pression de Fonctionnement, max 7 bar
- Pression de Fonctionnement, min 3 bar
- Température de fonctionnement, max 80 °C
- Température de fonctionnement, min -35 °C
- Répétabilité ±0,05 mm
- Options d'étanchéité Buna-N lubrifié en interne
- ID de série DCT-Series
- Course 90°
DCT Series Pneumatic Grippers are angular grippers with a 180° jaw opening allowing complete release of a directly fed part. Gripper forces ranges from 32 N (7.5 lbs) to 112 N (25 lbs). These pneumatic grippers are compact and designed for confined spaces, but consideration must be given to allow for the additional space required for the rotating jaws. The adjustable stop accessory (BR) will help to reduce the space requirement by restricting the open position. Standard mounting is from the top, but the gripper can also be mounted from the back of the body and will operate in any direction. Each jaw has a useful rotational stroke of 90° for a full 180° opening and there is a over-stroke of approximately 1.5° before reaching the fully gripped position. Jaws have to be designed to close for a grip of 0° gripping position (parallel jaws).
Harsh Environments are no problem for this gripper due to the shielding that repels chips and other particulate from the internal drive mechanism.
Note: To limit shocks at the end of the opening or closing stroke, it is highly recommended to design jaws with minimal inertia (as light and short as possible). Flow control valves make it possible to reduce the rotation speed and are highly recommended.
Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.
Harsh Environments are no problem for this gripper due to the shielding that repels chips and other particulate from the internal drive mechanism.
Note: To limit shocks at the end of the opening or closing stroke, it is highly recommended to design jaws with minimal inertia (as light and short as possible). Flow control valves make it possible to reduce the rotation speed and are highly recommended.
Pneumatic linear motion automation components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.
PDF & Manuels
Afficher les évaluations et les avis