1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LC703
Cellules de charge miniatures, à profil bas, de tension et de compression
Modèles en stock
- Profil bas
- Haute précision
- Conception industrielle robuste
- Fonctionnement en tension ou en compression
LC703
À partir de
C$
803.33
Modèles en stock
Aperçu du produit
- Étalonnage en 5 points 0%; 50%; 100%; 50%; 0%
- Longueur du câble 12 ft
- Option d'étalonnage 5 POINTS NIST
- Connexion électrique Câble
- Puissance électrique 2 mV/V
- Caractéristiques nominales du boîtier IP54
- Type de force Compression, Tension
- Déviation à pleine échelle 0.003 in
- Hystérésis ± 0,15 %
- Résistance d'entrée 360 Ω min
- Type de cellule de charge Pancake
- Température de fonctionnement, max 82 °C
- Température de fonctionnement, min -40 °C
- Résistance de sortie 350 ± 10 Ω
- Surcharge, max 300 % FS
- Température maximale du processus 71 °C
- Température minimale du processus 16 °C
- Répétabilité ± 0,05 %
- Surcharge sécurisée 150 % FS
- ID de série LC703
- Approvisionnement Remarque 10 VCC, 15 VCC maximum
- Tension d'alimentation 10 Vcc
- Effet de la plage thermique ± 0,005 % FSO/°F
- Effet thermique zéro ± 0,005 % FSO/°F
- Tableau de câblage/connecteurs Vert : sortie (+) ; blanc : sortie (−) ; noir : entrée (−) ; rouge : entrée (+)
- Erreur de zéro/équilibre ± 1 %
La série LC703 est une cellule de charge universelle (tension/compression) économique avec un profil extrêmement bas. Les échelles supérieures à 100 lb sont en acier inoxydable ; celles inférieures à 100 lb sont en aluminium. Le profil bas, le prix économique et la conception robuste de la LC703 la rendent adaptée à de nombreuses applications industrielles, notamment la robotique, les systèmes de pesage automatisés ou dans le cadre d'un système de contrôle de processus par lots.
La LC703 est également disponible en configurations métriques, avec des échelles de 0-5 à 0-500 kgf et des filetages métriques. Veuillez consulter le LCM703 pour plus de détails, ou contacter notre service Pression pour plus d'informations.
La LC703 est également disponible en configurations métriques, avec des échelles de 0-5 à 0-500 kgf et des filetages métriques. Veuillez consulter le LCM703 pour plus de détails, ou contacter notre service Pression pour plus d'informations.
PDF & Manuels
Afficher les évaluations et les avis
Rated 1 out of
5
by
febgartnghm dghm from
Nope
No information about the thread size came with the device, On line info onsite is incorrect.
Date published: 2022-03-21
Rated 5 out of
5
by
decline to name from
review
performs as advertised. that's all you want in a load cell, so no complaints
Date published: 2023-04-26
Rated 5 out of
5
by
Serana from
efficient
This 50 lb. load cell delivers precise and reliable performance, with excellent linearity of ±0.15%. The 2 mV/V output provides clear, consistent signals for accurate measurements, and the included cable makes installation straightforward. Ideal for applications requiring compact yet highly accurate force sensing.
Date published: 2025-09-02
How should these load cells be mounted? Is it alright to tighten bolts down into the tapped holes on either side? Is it alright to tighten a nut down onto the top and bottom surfaces? Or must the load only be applied to the threads?
The load is measured through the threads. If you are using the load cell in compression and are installing something like a load button into the active side threads you would want to leave a slight gap between the bottom of the load button and the surface of the load cell to allow for the deflection of the cell when loaded. Typical deflection would be 0.003"
Date published: 2021-08-07
For the model LCM703-50, what is the unit for the reading after connecting it to the CN16PT controller. Is it in lbs, kg... And for Platinum Monitor, what is the meaning of values and % in the graphing option when connected to LCM703-50
The LCM703-50 is a +/- 50 Kilogram load cell. The CN16PT has a scalable display that you can scale to whatever units of measure you wish within the constraints of 4 Digit display (-9999 to +9999 counts). It also has a movable decimal point if you require your display reading to be in 0.1, 0.01 or 0.001 resolution
Date published: 2021-08-27
The data sheet states that the load cell is calibrated in tension. Is there a way to get it calibrated for compressive use?
Hello,I am sorry, we are unable to calibrate this load cell in compression. You may however use this load cell in compression. If you need more assistance kindly email us at pressure@dwyeromega.com
Date published: 2023-11-01
Are these load cell units calibrated/certified for a certain period of time? Is there a calibration process that can be performed when the calibration/certification expires?
Thank you for you question?
The parts are stored in a controlled environment and would be nominally certified a year from installation.
The calibration can not be done in the field for these units.
Would need to be returned to Omega for re calibration
Date published: 2020-04-29
I have a customer who purchased the LC703-100 load cell and the standard cable length is 12'. Is 12' feet the maximum recommended length or can they extend the cable? If yes, what is the maximum length you recommend?
Thank you for the inquire
You can extend the cable. You will need to re calibrate after the extension .
There is no reamended extension length. Rule of thumb is 2 x max so that's 24 feet.
Date published: 2022-03-04
Do you need an amplifier for a LC-703-150? If so, part #? Thank you
Hello, if you can work with a mV signal you don't need an amplifier. If you need amplified signal such as volts or mA you could consider the DMD4059
Date published: 2023-10-05
On the LC703, which side is the active side? How is it different from the other side?
The active side of load cell one that is farther away from screws on the side of the load cell. The threads on that side react with the internal strain gage element
Date published: 2021-09-01
For the LC703-1K, is the sensing element a single resistor, a pair of resistors, or a four element bridge?
Element is a full (4 element) bridge
Date published: 2021-09-03