Besoin d'aide? Appelez-nous: 1-800-663-4209
MCJ-J
Miniature Electronic Ice Point
Choisir une variante
Type d'entrée
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix |
|---|---|
| 1-4 | C$190.00 / each |
| 5-9 | C$180.50 / each |
| 10-24 | C$176.70 / each |
| 25-49 | C$169.10 / each |
| 50-99 | C$165.30 / each |
| 100+ | C$161.50 / each |
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Hauteur | 2.94 in |
| Impédance de sortie | 200 Ω |
| Largeur | 1 in |
| Longueur | 0.5 in |
| Matériau de l'alliage (-) | Iron |
| Matériau en alliage (+) | Constantan |
| Options de couleur | Black |
| Poids | 57 g |
| Précision | 0.5°C from 15 to 30°C; 1°C from 10 to 45°C |
| Remarque sur la température de stockage | -25 to 75°C (-13 to 167°F) (without battery) |
| Température de fonctionnement, max | 45 °C |
| Température de fonctionnement, min | 10 °C |
| Température de référence | 0 °C |
| Température de stockage, max | 75 °C |
| Température de stockage, min | -25 °C |
| Type d'entrée | Thermocouple de type J |
| Pays d'origine | United States |
| Voir toutes les spécifications | |
Afficher les évaluations et les avis
Rated 2 out of
5
by
Tech10 from
Functional, but two physical aspects need redesign
These are reliable once they're installed, but the rotary switch and the battery well beneath it are very poorly designed - the battery's diameter is much smaller than the well it goes into, which means trying to situate it in the center while screwing the rotary knob onto it is a balancing act; the knob itself is crudely-fashioned, very difficult to turn, and inexact in its positioning. The worst aspect - perhaps because it would be the simplest to design properly - are the fasteners beneath the cover at the base. The screw travel once the threads finally engage is extremely short, which means attempting to connect anything but the tiniest wire gauge is going to get you stripped threads, leaving soldering directly to the holes the only remaining connection method - a whole lot of additional work nobody needs. I would be much happier to pay a little more for a reasonably-robust design. The current design reminds me of a '70s-era children's toy - a real chore to install without destroying, and needlessly delicate in normal usage.
Date published: 2018-08-02
Rated 5 out of
5
by
Jorge M from
very good perfomance of ice point
I bought a miniature electronic ice point a month ago, and then all the measurments in the lab are well controlled
Date published: 2017-08-12