Series-L10

Mini Float Switches for Liquid Control, Brass/Stainless Steel, 1 in NPT

(0)

Modèles en stock

Long operating life with hermetically sealed, magnetically-actuated SPST reed switch, which is encapsulated in a polypropylene housing
Easily toggle between normally open (NO) or normally closed (NC) with no change in the electrical connection using simple field switch adjustment
Quick and low cost maintenance from easily replaceable switch without affecting installation
Great value and years of reliable liquid level control with top quality materials at a low cost

Voir l'aperçu du produit

Series-L10

À partir de ^C$ 291.33

Modèles en stock

Acheter des modèles

10 variations disponibles

Voir toutes les options de série ci-dessous

Fiche technique

Aperçu du produit

Matériau du câble N/A
Connexion électrique Câble
Caractéristiques nominales du boîtier IP66, NEMA Type 4X, Résistant aux intempéries
Compatibilité avec les fluides Eau de procédé propre / eau de refroidissement, Liquides compatibles, Huiles / lubrifiants, Solvants organiques
Température de fonctionnement, max 200 °F
Type de pression Manomètre
Taille du raccordement au process 1/8 po
Type de raccordement au process NPT mâle
ID de série Series-L10
Remarque concernant le commutateur 1,5 A @ 24 VCC rés., 0,001 A @ 200 VCC rés., 0,5 A @ 120 VCA
Puissance nominale du commutateur 30 VA : 0,14 A à 220 Vca
Type de commutateur SPST NO/NC
Poids 10 oz
Calibre du fil 18 AWG

The Series L10 Flotect® Mini-Size Float Switches combine low cost with top quality materials and construction for great value and years of reliable liquid level control. Wide media compatibility is assured with a choice of brass or stainless steel bodies and external tees; polypropylene or SS floats. Two basic configurations are offered; with 1" NPT male threads for direct side mounting through a half coupling or with factory installed tee for external mounting.

All Series L10 controls feature a hermetically sealed, magnetically actuated SPST reed switch which is encapsulated in a polypropylene housing. Units are quickly and easily adjusted for your choice of normally open or normally closed operation thanks to a unique design. Just loosen two screws and instantly slide the switch assembly to the action required. N.O. and N.C. markings are clearly visible. This feature also speeds switch replacement if damage occurs.

Three types of floats are offered to accommodate liquids with specific gravities as low as 0.5; maximum pressures to 2000 psig (137.8 bar). Wire leads are 22 AWG X 18" (460 mm) and exit the switch assembly through 1/8" male NPT threads. These controls are UL recognized and CSA listed.

California Residents: Click Here for Proposition 65 WARNING.