1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
RTD-2-F3105
ÉLÉMENT RTD STYLE 3, 4 FILS AVEC CONNECTEUR POUR HH804
Modèles en stock
- Fabriqués à partir d'éléments alpha de 100 Ω, 0,00385
- Tolérance de classe A (+/- 0,06 Ω à 0 °C)
- Fil à 2, 3 ou 4 fils soudé au capteur à élément RTD
- Capteur RTD à couche mince ou bobiné
RTD-2-F3105
À partir de
C$
92.31
Modèles en stock
Aperçu du produit
- Résistance nominale 100 Ω
- Température minimale du processus -30 °C
- Élément de détection RTD à couche mince 100 Ω 2 x 2 mm
- ID de série RTD-2-F3105
- Type de capteur de température RTD
- Calibre du fil 26 AWG
- Type de fil Toronné
Tous les éléments RTD d'OMEGA peuvent être approvisionnés avec un fil conducteur supplémentaire fixé aux fils existants. Des fils plus longs offrent une plus grande flexibilité d'utilisation dans de nombreuses applications de capteurs RTD. La taille de la jonction encapsulée entre le fil conducteur et l'élément est réduite au minimum. Remarque : ces éléments ne sont pas destinés à être immergés directement dans des liquides. Les configurations ci-dessous correspondent à un fil conducteur de 36 pouces, style 2 (3 fils).
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
Tony the tiger from
Great products
Good selection and product description. It was exacly what we needed.
Date published: 2016-08-05
Rated 5 out of
5
by
MikeO from
RTD Elements
got it quickly! We were able to move in production becasue of the delivery
Date published: 2025-08-25
Rated 5 out of
5
by
Yavne G CTM Magnetics from
GREAT RTD SENSORS
LENGHT IS ALWAYS RIGHT, NO PROBLEMS WITH INSULATION JACKETS, ACCURACY AT TESTING STATION.
Date published: 2023-08-14
What is the cable OD for the 2 wire model? I plan on drilling a hole to route this sensor and cable through and I'm trying to determine what size it will need to be. Looking specifically at RTD-1-F3105-36-T.
Hi Nich,
Cable has a nominal OD of 0.042 x 0.068 inches.
Best regards
OMEGA
Date published: 2026-03-09
Do you have a recommended lab that can supply an ISO 17025 calibration on the RTD-3-1PT100KN2528-36-T?
Thank you for your inquiry. We do not have any recommendations for labs that can do ISO 17025 calibration
Date published: 2023-08-25
Can you perform an ISO 17025 calibration on the RTD-3-1PT100KN2528-36-T? If not, can you recommend a calibration house that is accredited?
Thank you for your inquiry. Unfortunately, Omega Engineering is not ISO 17025 certified. Our Lab is ISO 9000-2015 compliant
Date published: 2023-08-24
Hi I am wondering if this model (RTD-3-F3105-1M-T) is suitable for immersing it in water to perform basic calibration (ice and boiling water). Thx
These type of probes would not be suitable for immersing in liquid directly. If you insert them in a watertight tube or plastic bag you can immerse them.
Date published: 2025-02-13
When I connect the RTD-1-F3105-1M-T to the HH804U thermometer, which "Type" setting should I use? The choices are Pt385, Pt3926, or Pt3916. I get a different temperature reading for each type with the same RTD plugged in. Where is this documented?
Thank you for your inquiry. F3105 Elements are Pt 385 European Curve. https://www.omega.com/en-us/temperature-measurement/temperature-sensing-elements/f3105-3100-w2100-2200/p/F3105
Date published: 2023-08-08