1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
DP41-S-Series
Indicateur haute performance à haute résolution à 6 chiffres pour jauges de contraite/cellules de charge
Modèles en stock
- Compatible with Strain Gage Bridge Sensors or Ratiometric Voltage Sensors
- Adjustable Filtering Up to 13 Hz
- Displays Up to 999,999 Counts
- NEMA-4 Front Panel
DP41-S-Series
Depuis
C$
1 504.10
Modèles en stock
L'aperçu du produit
- Accuracy ± 0.005 %
- Analog-to-Digital Technique Dual slope
- CMRR 120 dB
- Common Mode Voltage 1500 Vp per HV test
- Cutout Dimensions 1.772 x 3.622 in
- Display Note Red 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators
- Display Type LED
- Form factor 1/8 DIN
- Height 1.89 in
- Input Configuration Front panel buttons or via your computer
- Input Range Note 0 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0 to 20 mA, 4 to 20 mA
- Input Type Single Ended, Strain
- Internal Resolution 15 bit
- Length 6.5 in
- Materials Polycarbonate
- Measurement Type Strain
- Mounting Panel
- NMRR 60 dB
- Number of Digits 6
- Number of Inputs 1
- Offset Adjustment 0 to 999999 or 0 to - 99999 programmable
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Polarity Unipolar/Bipolar, programmable
- Power Consumption 10 W
- Power Consumption Note 6 W Nominal, 10 W
- Reading Rate 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz
- Relative Humidity 95% RH non-condensing
- Resolution 15-bit
- Sampling Rate 13 Hz (13 updates/second)
- Sensor Break Protection Up-scale or down-scale, programmable
- Sensor Excitation 10 V at 30 mA; 24V at 25 mA
- SetPoint Outputs 4 Isolated Open Collector; Rated 150 mA at 1V Sink, 30V Open
- Span Adjustment 0.00001 to 500,000, programmable
- Span Temperature Coefficient ± 20 ppm
- Step Response 1 s to 99.9%
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Warm Up Time 50 min
- Weight 574 g
- Width 3.78 in
The OMEGA ® DP41-S indicators offer exceptional performance in a strain gage meter. The DP41-S has standard built-in excitation. The input range is selected via internal jumpers, and scaling to engineering units is performed using the front keypad. The DP41-S accepts strain gage bridge sensors and ratiometric voltage measurements. Programming the DP41-S is accomplished through the five front panel keypads. If the optional RS-232 or RS-485 communications are installed, the operator can remotely set all display parameters.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
PDF et manuels
Afficher les notes et les avis
Rated 1 out of
5
by
17025 from
Save your money
1) No zero or Tate button. This is a basic function of nearly every instrument of this type.
2) No auto zero tracking. Again, a basic function found on every competitors equipment.
3) The scaling function simply does not work. Specifically, scaling with a known load will adjust span values while not changing zero. If your transducer has an output at no load (such as the case for any dead load), the only option is to put in an offset, which also changes span values.
When one of these shows up in our calibration lab, we push the customer to buy something else. These are an absolute joke.
Date published: 2022-01-13
Rated 3 out of
5
by
Adis from
Title
Not easy to use. some setups and wiring needs to be done before.
Date published: 2021-03-31
Rated 5 out of
5
by
madmagyar from
Long time OMEGA customer
Never been let down yet by any of their products, I have been purchasing from OMEGA for 20 plus years
Date published: 2017-05-02
Rated 5 out of
5
by
Jeru DS from
Works Great !
A great product. Easily operated. Would consider purchasing again.
Date published: 2024-12-19