1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DP41-S-Series
Compteur de déformation haute performance, affichage haute résolution à 6 chiffres
Modèles en stock
- Compatible avec les capteurs à pont de jauge de contrainte ou les capteurs de tension ratiométrique
- Filtrage réglable jusqu’à 13 Hz
- Affiche jusqu’à 999 999 comptes
- Panneau avant NEMA-4
DP41-S-Series
À partir de
C$
1,515.23
Modèles en stock
Aperçu du produit
- Précision ± 0.005 %
- Technique analogique-numérique Double pente
- CMRR 120 dB
- Tension de mode commun 1500 Vp par test HV
- Dimensions de la découpe 1,772 x 3,622 po
- Remarque sur l'affichage Rouge, 6 chiffres, 14 segments, hauteur de 13,7 mm (0,54") ; 4 indicateurs d’alarme
- Type d'affichage LED
- Facteur de forme 1/8 DIN
- Hauteur 1.89 in
- Configuration d'entrée Boutons du panneau avant ou via votre ordinateur
- Échelle d'entrée Remarque 0 à 100 mV, 0 à 1V, 0 à 5V, 1 à 5V, 0 à 10V, 0 à 100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0 à 20 mA, 4 à 20 mA
- Type d'entrée Simple extrémité ; déformation
- Résolution interne 15 bits
- Longueur 6.5 in
- Matériaux Polycarbonate
- Type de mesure Déformation
- Montage Panneau
- NMRR 60 dB
- Nombre de chiffres 6
- Nombre d'entrées 1
- Réglage du décalage 0 à 999999 ou 0 à - 99999 programmable
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Polarité Unipolaire/bipolaire ; programmable
- Consommation électrique 10 W
- Consommation électrique Remarque 6 W nominal, 10 W
- Taux de lecture 3/s ou 13/s ; 60 Hz ; 3/s ou 12/s ; 50 Hz
- Humidité relative 95 % HR sans condensation
- Résolution 15 bits
- Fréquence d'échantillonnage 13 Hz (13 mises à jour/seconde)
- Protection contre la rupture du capteur Montée ou descente d’échelle, programmable
- Excitation du capteur 10 V à 30 mA ; 24 V à 25 mA
- ID de série DP41-S-Series
- Sorties de consigne 4 collecteurs ouverts isolés ; courant nominal de 150 mA à 1 V en mode puits, 30 V en circuit ouvert
- Réglage de l'amplitude 0,00001 à 500 000 ; programmable
- Coefficient de température de l'étendue ± 20 ppm
- Réponse en échelon 1 s à 99,9 %
- Température de stockage, max 85 °C
- Température de stockage, min -40 °C
- Temps de chauffe 50 min
- Poids 574 g
- Largeur 3.78 in
Les indicateurs OMEGA ® DP41-S offrent des performances exceptionnelles dans un compteur à jauge de contrainte. Le DP41-S dispose d'une excitation intégrée standard. La plage d'entrée est sélectionnée via des cavaliers internes, et la mise à l'échelle des unités techniques s'effectue à l'aide du clavier frontal. Le DP41-S accepte les capteurs à pont de jauge de contrainte et les mesures de tension ratiométriques. La programmation du DP41-S s'effectue à l'aide des cinq touches du clavier frontal. Si les communications RS-232 ou RS-485 en option sont installées, l'opérateur peut régler à distance tous les paramètres d'affichage.
Des exemples de prix pour les modèles populaires sont indiqués dans la case " Pour commander ". Utilisez le " Générateur de référence " ci-dessous pour obtenir les prix de tous les modèles disponibles.
Des exemples de prix pour les modèles populaires sont indiqués dans la case " Pour commander ". Utilisez le " Générateur de référence " ci-dessous pour obtenir les prix de tous les modèles disponibles.
PDF & Manuels
Afficher les évaluations et les avis
Rated 1 out of
5
by
17025 from
Save your money
1) No zero or Tate button. This is a basic function of nearly every instrument of this type.
2) No auto zero tracking. Again, a basic function found on every competitors equipment.
3) The scaling function simply does not work. Specifically, scaling with a known load will adjust span values while not changing zero. If your transducer has an output at no load (such as the case for any dead load), the only option is to put in an offset, which also changes span values.
When one of these shows up in our calibration lab, we push the customer to buy something else. These are an absolute joke.
Date published: 2022-01-13
Rated 3 out of
5
by
Adis from
Title
Not easy to use. some setups and wiring needs to be done before.
Date published: 2021-03-31
Rated 5 out of
5
by
madmagyar from
Long time OMEGA customer
Never been let down yet by any of their products, I have been purchasing from OMEGA for 20 plus years
Date published: 2017-05-02
Rated 5 out of
5
by
Mark B from
Awesome product!
It was absolutely amazing and worked perfectly. Once I set it up there was nothing I couldn’t do
Date published: 2026-03-14
Rated 5 out of
5
by
Jeru DS from
Works Great !
A great product. Easily operated. Would consider purchasing again.
Date published: 2024-12-19
Hi, Can I get some information on the RS232 command interface? The baud rate? Input/output data format?
Tayo, please see page 9-26 of the full manual for the Baud Rates: https://assets.omega.com/manuals/M1291.pdf
Date published: 2024-02-13
I have an older DP41-S with the older style RS-485 communications. I have not been able to establish communications with it. I have a few other things to try, but if it turns out the communication board is bad, can I buy a replacement RS-485 board?
Thanks for your question. Our Tech Support team has connected with you and a manual has been sent per your request. If there is anything else we can help you with, please contact our Tech Support team anytime, thank you.
Date published: 2019-04-25
Does the DP41-S Strain Gage Indicator have an up-to-date digital output? I'm aware of option DP40-B, however its 300-19,200 baud output is somewhat antiquated? Higher baud rate available? USB output available?
My company has a High Performance Strain Gage Indicator DP41-Sthis equipment nee to be calibration?
will use for checking the load on the cylinder,
Date published: 2022-05-04
Are the mating electrical connectors for the display available for purchase separately? If not, can you provide the part numbers of the mating connectors so they can be purchased from an electrical supplier?
Thank you for your inquire.
Yes they are available.
We have 3 different types for input output and power.
Please contact us direct to discuss the connectors' that you are in need of.
Date published: 2021-05-28
Beside two pages PDF manual. Do you have full IO&M manual for the meter DP41-S-AR4. if yes, can you send to me?
Thank you for you question?
Please email pressure@omega.com We will be more then happy to assist you with this.
Date published: 2020-04-07
I did not find this code DP462 ?
The DP460 Series is an older display that has been discontinued for several year. The most current display the would take it's place is either the DP8PT (4 Digits) or the DP8EPT (6 Digits).
Date published: 2020-04-17
LC8250-625-40K is said to be compatible with DP41-S, the meter is to measure forces in lbs not strains, is this correct?
The DP41-S has a 6 digit scalable display so you can read directly in pounds force by scaling it to read 0 to 40000 count across the output signal from the load cell.
Date published: 2021-10-21
will it shorten the life of a DP41 meter if the input voltage is 128
Specification calls out a maximum of 126.5 VAC for the 115VAC powered version. We have no data on how 128 VAC would effect the unit
Date published: 2022-02-25