1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PX309
Transducteurs de pression en acier inoxydable à usage général
Modèles en stock
- Plages de basse pression de 1, 2 et 5 psi !
- Construction entièrement en acier inoxydable
- Pression relative, absolue, composée ou pression de vide
- Conception robuste à semi-conducteurs
PX309
À partir de
C$
413.83
Modèles en stock
Aperçu du produit
- Classe de précision 0,1 % à 0,25
- Fonctions supplémentaires 1 Aucun
- Largeur de bande DC à 1 kHz
- Matériau du boîtier Acier inoxydable 316
- Caractéristiques nominales du boîtier IP65
- Résistance d'isolation 1 MΩ à 25 Vcc
- Cycles de pression 10 millions, minimum
- Pression, min 0 psi
- Remarque concernant la pression Surcharge de pression : -15 à 50 psig et 0 à 1000 psia : 3 fois la pression nominale ou 20 psi, selon la valeur la plus élevée, 100 à 10 000 psig : 2 fois la pression nominale
- Taille du raccordement au process 1/4 po
- Type de raccordement au process NPT mâle
- Temps de réponse <1 ms
- ID de série PX309
- Résistance aux chocs 50 g, 11 ms demi-onde sinusoïdale
- Valeur d'étalonnage du shunt Dans la direction verticale avec raccordement vers le bas, les plages composées sont étalonnées uniquement pour une sortie de pression positive
- Stabilité ± 0,25 %
- Remarque sur la stabilité Stabilité sur 1 an : <0,25 % FS
- Tension d'alimentation 9 à 30 Vcc
- Vibration ± 20 g
- Poids 154 g
Les transducteurs de pression en acier inoxydable de la série PX309 d'OMEGA inférieurs à 100 psi utilisent un capteur en silicium de haute précision protégé par un diaphragme en acier inoxydable rempli d'huile. Les appareils de 100 psi et plus utilisent des jauges de contrainte en silicium liées moléculairement au diaphragme en acier inoxydable. Nos ingénieurs d'application travaillent en étroite collaboration avec nos clients pour personnaliser, concevoir ou créer des produits entièrement nouveaux. Appelez-nous, que vous soyez un équipementier, un fabricant ou un utilisateur final.
Le PX309 est également disponible en configurations métriques ; veuillez consulter le PXM309 pour plus de détails, ou contacter notre département Pression pour plus d'informations.
Le PX309 est également disponible en configurations métriques ; veuillez consulter le PXM309 pour plus de détails, ou contacter notre département Pression pour plus d'informations.
PDF & Manuels
Accessoires
accessories
Connecteur protégé contre les éléments avec 6 contacts femelles, plage de température de -55 à 125 °C (-67 à 257 °F)
C$66.26 / each
107 En stock
Convertisseur compact de courant ou tension analogique vers IO Link
C$245.46 / each
89 En stock
cables
Câble ventilé de 2 m (6 pi) avec connecteur M12 pour PX359 pour plages de manomètre <500 psi
C$172.75 / each
31 En stock
Câble ventilé de 5 m (16 pi) avec connecteur M12 pour PX359 pour plages de mesure manométriques <500 psi
C$241.25 / each
146 En stock
DC Cable Assemblies for Probes, Sensors and Transmitters
C$39.82 / each
24 En stock
meters/controllers
Compteur de panneau 1/8 DIN pour thermocouple et RTD avec grand affichage couleur sélectionnable
C$707.44 / each
0 En stock
Compteur de panneau 1/8 DIN pour thermocouple et RTD avec grand affichage couleur sélectionnable
C$707.44 / each
0 En stock
Afficher les évaluations et les avis
Rated 1 out of
5
by
Will L from
Untrustworthy calibrations
Faked calibration certificate (again). Claims to have been calibrated to 10,000psi using calibration equipment that will go to only 6,000psi
Date published: 2024-04-13
Rated 2 out of
5
by
H3rb3rt from
Word of Caution
The product performance was great, but there is a major design flaw. The cable connection option has the cable connected to the body by a nut that if loosened and taken off will break the unit. Whereas the PX409 series differential transducer instead does not have this problem, it has a sealed connection that doesn't allow you to break the unit so easily.
The reason I was attempting to take the nut off in the first place was because it was loose and the unit was dunked under water for cleaning so I was trying to make sure the unit would dry out fully before supplying power to the transducer.
Date published: 2021-04-16
Rated 4 out of
5
by
under pressure from
compact and reliable
Have purchased several of these transducers over the last 10 years and do not recall ever having to replace one due to failure. I usually get the 319 series and my only complaint is that there is no key on the connector to simplify pin alignment. They are also offered a wide range of pressure ratings.
Date published: 2019-04-04
Rated 5 out of
5
by
Dustin M from
Reliable Pressure Transducer
Calibrated well and works as it should! Will be buying again.
Date published: 2026-04-08
Rated 5 out of
5
by
Jacob M from
We keep coming back
Very durable and very accurate transducers. Best that we could find
Date published: 2026-04-04
Rated 1 out of
5
by
Eric M from
Slow, unresponsive ordering process
The entire process of buying to delivery was slow and poorly communicated. I had submitted an urgent order and it took way to long to receive order confirmation as well as unacceptably long for the product to ship. Please make drastic improvements to your order processing process and take actions like actively reviewing the current process for inefficiencies and ways to improve.
Date published: 2025-12-26
Rated 5 out of
5
by
NDPIII from
Solid product
Durable , stable readings in propeller dyno environment .
Date published: 2025-12-10
Rated 5 out of
5
by
Alex I from
No hassle
No hassle, I got the items I ordered. I had a tight timeline.
Date published: 2025-12-08