1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PX603-PX613-PX605-PX615
Transducteurs de pression à usage général avec zéro et échelle ajustables
Modèles en stock
- Excellente stabilité à long terme
- Construction entièrement en acier inoxydable
- Modèles avec câble ou connecteur NEMA 4
- Précision de 0,4 %
PX603-PX613-PX605-PX615
À partir de
C$
713.52
Modèles en stock
Aperçu du produit
- Précision ± 0.4 %
- Classe de précision > 0.25%
- Précision ± 0,4 % BFSL
- Fonctions supplémentaires 1 Aucun
- Pression d'éclatement 8 fois la pleine échelle
- Longueur du câble 0.9 m
- Température compensée, max 82 °C
- Température compensée, min -29 °C
- Consommation électrique <3,0 mA
- Matériau du boîtier Acier inoxydable 17-4 PH
- Type de jauge Polysilicium à couche mince Piézorésistif
- Hystérésis ± 0,2 %
- Résistance d'isolation 100 MΩ
- Connecteur correspondant MIL-26482-I 8-4S
- Température de fonctionnement, max 90 °C
- Température de fonctionnement, min -48 °C
- Cycles de pression 100 millions
- Erreur de Répétabilité ± 0,05 % de l’échelle complète
- Temps de réponse 5 ms
- ID de série PX603-PX613-PX605-PX615
- Stabilité ± 1,0 %
- Approvisionnement Remarque 10 à 36 Vcc non régulé
- Tension d'alimentation 10 à 36 Vcc
- Effet thermique sur l'erreur d'étendue, max ± 0,07 % FS/°C
- Effet thermique sur l'erreur zéro, max ± 0,07 % FS/°C , ± 0,07 % FS/°C
- Poids 128 g
Série PX605/PX615 de transducteurs de pression à usage général avec une précision de 0,4 %, une conception à couche mince pour une fiabilité élevée et une stabilité à long terme. Classés NEMA 4 (IP65), ils sont idéaux pour les applications exigeantes avec des liquides ou des gaz.
Accessoires
accessories
Connecteur intérieur avec 4 contacts femelles, plage de température de -55 à 125 °C (-67 à 257 °F)
C$59.12 / each
47 En stock
installation hardware
1/4" NPT, pression maximale de 10 000 psi, pour eau et huile légère
C$33.83 / each
19 En stock
1/4" NPT, pression maximale de 10 000 psi, pour l’air, la vapeur et les gaz
C$34.22 / each
0 En stock
Afficher les évaluations et les avis
Rated 4 out of
5
by
Jeremiah from
As Ordered
Came as ordered, albeit a slightly long time to get for an in stock item
Date published: 2025-05-29
Rated 5 out of
5
by
Mechanic from
Good Quality Pressure Sensor
Item is very reliable, and it is easy to install and connect to 4-20 Ma PLC or control systems.
Date published: 2025-01-22
Rated 5 out of
5
by
Cody P from
Cylinder Testing
Perfect for our cycle machines! we purchase at least 3-5 of these monthly. works like a charm.
Date published: 2024-02-05
Rated 5 out of
5
by
Jim Bob II from
works well
works well for my application. cost to performance is a good value
Date published: 2023-07-26
Rated 5 out of
5
by
Good from
Good product
Good One and product quality very nice and i can see
Date published: 2023-05-11
Rated 5 out of
5
by
Anonymous from
Fantastic product
These items work very well for the application we use them for.
Date published: 2023-04-09
Rated 5 out of
5
by
Anonymous from
Used with sub ambient cannister sampling.
This worked well for our application of sub ambient cannister sampling. From -30 inHg to -6 inHg for record keeping.
Date published: 2020-11-12
I'm connecting the wires to my own serial connector. What are the assignments of the white, green and red cables? I'm assuming green is data, red is +VDC and white is GND. Is that correct?
Wiring would be as follows. Red is + Input Power, Green is + Output Signal, White is Common (- Input & - Signal).
Date published: 2020-03-13
Are the Model PX615-30V15GI Class I Div. 2 compliant? If not, is there a similar Omega sensor that is?
The PX605/615 Series Pressure Transmitters are not Class I Div 2 Compliant. The PX835-015CGI Intrinsically Safe Pressure Transmitter would meet you requirements.
Date published: 2021-06-30
What IP rating for this sensor? I want to use it with distilled water is it compatible with it>
It is mentioned on attached pdf datasheet. NEMA 4 (IP65) Cable or Connector Models. Diaphragm: 17-4 PH stainless steel
Case: 300 Series stainless steel. Ideal for Liquid or Gas
Date published: 2024-12-30
Regarding product Item# PX615-20KGI: what electrical certifications does it carry for US and Canadian operations. Are they UL, ULc, or CSA compliant? Thank you!
The PX615 Series pressure transmitters are not UL, ULc or CSA Compliant.
Date published: 2019-07-24
Is there a life expectancy on the PX615 series transducer? If so how long?
Service life for PX615 is indefinite as long as it's operate within it's specified parameters. There are examples of theses sensors being in service for several years without any problems
Date published: 2019-11-16
Can I get the data from this sensor into my computer? Do you have any built-in application for this purpose or do I have to use the Data Acquisition Card to log the output voltage? If the later is true then tell me the conversion equation?
You will need to use Data Acquisition card. The out is a linear 1 to 5VDC over the sensors calibrated pressure range. You can use the linear equation y=mx+b
Date published: 2021-10-04
Is the PX605-5KGI Model CSA ou cUL compliant?
The PX605 Series pressure transmitters are not UL, cUL or CSA Compliant
Date published: 2024-06-21
Do you have a drawing about the "High Pressure F-250-C", I need it to choose a fitting
Hello and thank you for your question. Could please contact the pressure department at Omega directly (pressure@omega.com)?
We would be happy to provide you with a drawing!
Date published: 2020-01-22