Besoin d'aide? Appelez-nous: 1-800-663-4209
FMA5000A-Series
Contrôleurs de masse de gaz avec ou sans affichage intégré
Modèles en stock
- Étalonnage traçable NIST
- Mesure et contrôle du débit massique de gaz sans compensation de température ou de pression
- Disponible en aluminium économique ou en acier inoxydable 316 résistant à la corrosion
- Écran LCD inclinable pour une lecture facile
FMA5000A-Series
À partir de
C$
1 823.72
Modèles en stock
Aperçu du produit
- Précision Pour les unités avec une plage complète inférieure à 100 SLM ± 1 % FS, incluant la linéarité entre 15 et 25 °C (59 à 77 °F) et 0,7 à 4,2 kg/cm² (10 à 60 psia). Pour les unités ≥ 100 SLM Plage complète : ± 1,5 % FS, incluant la linéarité entre 15 et 25 °C (59 à 77 °F) et 0,7 à 4,2 kg/cm² (10 à 60 psia) de 20 à 100 % de la plage ; ± 3 % FS de 0 à 20 % de la plage
- Sensibilité à l'altitude Chemin d'écoulement horizontal, sans décalage de l'étalonnage jusqu'à +20 degrés de tangage
- Étalonnage Certificat NIST
- Vanne de régulation Électrovanne
- Puissance électrique 4 à 20 mA ; 0 à 5 Vcc
- Caractéristiques nominales du boîtier Niveau d'installation II/Degré de pollution II (CEI 60664)
- Échelle d'humidité 0 à 70 % HR
- Taux de fuite sous vide moins de 10^⁻⁷ cc He/s
- Pression de Fonctionnement, min 0 psi
- Pression de Fonctionnement Remarque 35 kg/cm² manométrique (500 psig) ; 70 kg/cm² manométrique (1000 psig) pour des plages allant jusqu'à 100 SLPM. 1,76 kg/cm (25 psig) optimum
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 5 °C
- Détails de la sortie Linéaire 0 à 5 Vcc : charge minimale de 1000 V 4 à 20 mA : résistance de boucle de 50 à 500 V, bruit maximal de ± 20 mV
- Signal de sortie Courant ; tension
- Coefficient de pression 0,01 % FS/psi
- Chute de pression maximale 50 psi
- Répétabilité ± 0,5 %
- Temps de réponse 5 s
- Remarque sur le temps de réponse 5 secondes pour atteindre ± 2 % du débit réglé sur une plage de 25 à 100 % de la pleine échelle
- ID de série FMA5000A-Series
- Courant d'approvisionnement Jusqu'à 800 mA
- Tension d'alimentation 12 à 15 Vcc
- Coefficient de température 0,15 % FS/°C
- Rapport de réduction 40:1
- Débit volumétrique, min 0.25 SCCM
Les régulateurs électroniques de débit massique de gaz de la série FMA5400A/5500A permettent de contrôler le débit d'une grande variété de gaz, de 0 à 10 SCCM jusqu'à 100 SLM. Utilisant le transfert de chaleur à travers un tube chauffé pour mesurer le débit moléculaire du gaz, les modèles FMA5400A/5500A permettent de mesurer directement le débit massique du gaz, sans avoir à compenser les variations de température ou de pression du gaz (dans les limites indiquées). Ils sont disponibles dans une construction économique en aluminium/laiton pour les débits de gaz classiques et dans une construction en acier inoxydable 316 pour les applications nécessitant une plus grande résistance à la corrosion. La série FMA5400A sans affichage intégré est approvisionnée avec une sortie analogique 0-5 Vcc et 4 à 20 mA pour la surveillance à distance ; la série FMA5500A dispose à la fois d'un affichage intégré à 3 chiffres et demi et de sorties analogiques. L'affichage est inclinable à plus de 90 degrés pour faciliter la lecture. L'affichage est étalonné en standard pour une lecture directe en SCCM ou SLM pour l'azote (autres étalonnages de gaz disponibles sur commande spéciale).
Les régulateurs de débit massique FMA5400A/5500A sont équipés d'une vanne électromagnétique normalement fermée intégrée qui maintient un débit constant indépendamment des variations de pression à l'entrée ou à la sortie. Le point de consigne est contrôlé soit localement via un potentiomètre accessible par une fenêtre d'accès dans le boîtier, soit à distance via un signal analogique 0-5 Vcc ou 4-20 mA (sélectionnable sur le terrain). La série FMA5400A/5500A nécessite une alimentation de 12 à 26 Vcc à 800 mA maximum, qui peut être fournie par l'alimentation murale FMA545PW. Alimentation de 12 à 15 Vcc à 800 mA maximum (tailles 43, 44 et 45 UNIQUEMENT). Le modèle FMA545C (fourni séparément) est équipé d'un connecteur " D " à 15 broches avec un câble blindé de 2,4 m pour accéder aux signaux de sortie analogiques et aux connexions d'alimentation. L'écran LCD d'approvisionnement avec la série FMA5500A est connecté à l'électronique inférieure via une fiche modulaire. L'écran LCD peut être installé à distance en achetant un câble de connexion à distance FMA18RC. Vous devez ensuite construire votre propre assemblage pour le montage de l'écran LCD sur le panneau.
PDF & Manuels
Accessoires
cables
meters/controllers
Alimentation pour la série FMA5400A/FMA5500A 110/230 VAC prise 2 broches
C$155.52 / each
36 En stock
ALIMENTATION 230VAC POUR LA SÉRIE FMA5400A/FMA5500A AVEC FICHE EURO À 2 BROCHES
C$176.24 / each
0 En stock
sensors
Economical Gas Mass Controllers With or Without Integral Display
C$3 713.47 / each
0 En stock
Contrôleurs de masse de gaz économiques avec ou sans affichage intégré
C$4 562.71 / each
0 En stock
Afficher les évaluations et les avis
Rated 2 out of
5
by
PJ_chem from
Good MFC but poor customer support
Beware!! they don't sell it with power cable so make sure you buy it! The technical support person is not thorough and will try not to understand your needs. The return policy is also not good. However, it is a good MFC with precise control.
Date published: 2025-02-03
Rated 5 out of
5
by
Josephine from
Reliable, accurate, and simple
Shipped quickly and was as described. High quality components that are being used for some exciting science. Easy to program and use.
Date published: 2024-10-28
Rated 5 out of
5
by
engineer6944 from
You get what you pay for
Works exactly as expected, like all Omega products.
Date published: 2023-09-08
Rated 5 out of
5
by
Bilge from
Mass flow controller
It works great, very sensitive. Seller should provide a adapter with controllers to run
Date published: 2023-03-18
Rated 5 out of
5
by
Anonymous from
Economic and Efficient
This is a great purchase for our needs with economic price.
Date published: 2022-03-09
Rated 5 out of
5
by
Steve Engineer from
Love them
Great MFCs at a quick turn around, we use them in many applications. Some times in multiple flows.
Date published: 2022-02-20
Rated 1 out of
5
by
Steve L from
Difficult to work with and incomplete manual
Mass flow controller is not functional with shop air.
Date published: 2021-09-06
We required Flow controllers for Methane gas & flow is 34LPM & second one for Propane gas 350 Liter per hours. Kindly suggest us your best module for the same.
Thank you for your inquiry about the mass fow controllers. It would be recommended to use the FMA5528A for methane gas and FMA5520A for propane gas and will need to create a customized part number for the flow controllers mentioned and then, have it loaded onto the web site to prepare a quote.
Date published: 2022-02-28
I want to know the educational prices of the machine OMEGA FMA5502A
Thank you for your inquiry. Please email your request to sales@omega.com
Date published: 2021-08-24
Hello, I'm looking for a flow controller that can handle flows (CO/Nitrogen mix) of around 200-300 ml/min with an accuracy of plus/minus 2%. Can you suggest something ?
Thank you for your inquiry. The FMA5512A is the controller that will fit the flow range and can have it calibrated specifically for the percentage mixture of gas by weight or by volume. Please note that in the event the composition changes during the reaction, the controller is not able to compensate for the changes that occurr.
Date published: 2023-07-28
I need to set flow rates, but I don't see a way to key in my settings, so how exactly this works? I have a FMA5518A-C
Thank you for your inquiry! The flow rate can be controlled through either locally or remotely depending on preference. Local control requires the use of the local set point potentiometer on the back of the unit. For remote control 0-5 VDC or 4-20 mA reference signals will be needed to adjust the flow.
Date published: 2021-11-01
Does the FMA5400A/5500A both measure and control flow rate? Or will I need two separate products?
Thank you for your inquiry for the mass flow controller. First, it is advised to use as a controller to control the gas and can be used as a flow meter, in the event that you do not have the means to measure flow rate only. You can use the override Purge on PINS 3 & 4 for 15 minutes at a time and this is due to the cylinder becoming hot and needs to cool down to the touch.
Date published: 2021-10-01
Hello, I'm looking for a flow controller that can handle flows of CO of around 400–500 ml/min at a pressure of 1000 psig with an accuracy of plus/minus 2%. Can you suggest something?
Thanks for your question. FMA5514A-CO2 gas controller will handle up to 730 mL/min of CO2. Please email us to flow@omega.com for a formal quote
Date published: 2023-11-27
I have an FMA5508A-ST MFC with me and I have used it with many gases like Ar, He, etc. I wanted to know is it compatible with water vapors? I wanted to use around 10% water vapor in Ar for my experiments. Thanks in advance.
Thank you for your inquiry about the MFC. Unfortunately, the MFC work best with clean, dry gases and can sustain relative humidity, non-condensing gases, up to 70%.
Date published: 2022-02-15
I have FMA5502A on hand but there is no instructions on how to use the potentiostat on the back to adjust the flow rate, or set the identity of the gas (we want to use this for CO2). Do you have detailed instructions on this?
Thank you for your inquiry about the MFC. If manually controlling the flow via the potenitometer, clock-wise turn is increasing the flow rate and counter clock-wise would decrease the flow rate and it may take a number of 360 degree turns to reach the desire flow via the LCD display. The manual has a chart listing a number of different gases that can be used to control and along with a K-factor associated to multiply against the flow rate on the LCD that will account for that specific gas.
Date published: 2023-06-15