Series-MTL5541

Galvanic Barrier, DIN Rail Mount, Plug-In, for Dwyer® Hazardous Areas

(0)

Modèles en stock

Easy snap-in installation for most DIN rails
Safe to use in hazardous locations

Voir l'aperçu du produit

Series-MTL5541

Depuis ^C$ 1,670.59

Modèles en stock

Modèles de boutique

1 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Précision ± 15 µA
Applications Fluid Measurement and Control, Industrial and Manufacturing
Compliance FM, UL
Current Sink, Max 600 Ω max
Electrical Safety Vo= 28 V Io= 93 mA Po= 651mW Um= 253 RMS or DC. Weight: 5.3 oz (150 g)
Input Control Signal 16.2 Vdc
Isolation 250 V RMS, tested at 1500 V RMS minimum, between safe-area and hazardous-area terminals; 50 V between safe-area circuits and power supply
LED Indicators Green: Power indication
Load Resistance 0 to 360Ω @ 24 mA / 0 to 450Ω @ 20 mA
Mounting T-section 35 mm DIN rail to EN 50022
Operating Temperature, Max 140 °F
Operating Temperature, Min -6 °F
Output Detail Signal range: 4-20 mA; Under/over-range: 0-24 mA
Output Resistance >1 MΩ
Output Signal Current
Power Consumption 1 W
Relative Humidity 5 to 95% RH
Response Time 50 µs
Response Time Note Settles to within 10% of final value within 50 µs
Storage Temperature, Max 176 °F
Storage Temperature, Min -40 °F
Supply Power Type DC
Supply Voltage 20 to 35 Vdc
Temperature Drift < 0.8µA/°C
Terminal block up to 2.5 mm²
Weight 5.3 oz

The Series MTL5541 Galvanic Barrier provides intrinsically safe isolation for communication with Dwyer® transmitters approved for use in hazardous areas. This galvanic barrier eliminates the need for a high integrity earth ground required when using shunt type diode type safety barriers. DIN rail mounting and plug-in signal and power connectors simplify installation and maintenance.