OS212

Capteur de température infrarouge fixe avec émissivité réglable et affichage optionnel

0,0

(0)

Temperature Range -20 to 500°C (-4 to 932ºF)
2-Wire 4 to 20 mA Output Proportional to Target Temperature
4 to 20 mA Input to Control Emissivity Setting
Optional Manual Emissivity Adjuster (Model No. OS210-PT)

Voir l'aperçu du produit

OS212

Depuis ^C$ 288.00

Modèles de boutique

1 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Précision ± 1 %
Détail de la précision ± 1% of reading or ± 1ºC whichever is greater
Cable Length 3.3 ft
Cable Length Note 1 m (3.3') (included) longer lengths available to order
Display No
Emissivity, Max 1
Emissivity, Min 0.2
Emissivity Note 0.2 to 1.0 via 4 to 20 mA input
Enclosure Ratings IP65
Field of view 2:1
Housing Material Stainless Steel
Impedance 900 Ω
Operating Temperature, Max 70 °C
Operating Temperature, Min 0 °C
Output Signal Current
Process Temperature, Min 0 °C
Relative Humidity, Max 0.95
Relative Humidity Note 95% max non-condensing
Repeatability ± 0.5%
Repeatability Note ± 0.5% of reading or ± 0.5ºC whichever is greater
Response Time 240 ms
Response Time Note 240 mS (90% response)
Sensing head Mounting 16 mm
Sensor Voltage 6 Vdc
Spectral Response, Max 14 μm
Spectral Response, Min 8 μm
Supply Voltage 24 to 28 Vdc
Temperature Range MT-Medium
Weight 95 g
Weight Note 95 g (3.4 oz) with cable

The OMEGA Infrared Series is a range of high quality, low cost, compact sensors which measure the temperature of inaccessible or moving objects and materials. They measure temperatures from -20 to 500°C (-4 to 932ºF), accurately and consistently, with an outstanding response time of 240 mS. OMEGA sensors transmit the target temperature as a 4 to 20 mA output and offer a simple solution for most non-contact temperature measurement applications. The sensor’s emissivity setting can be adjusted from 0.2 to 1.0 to cope with different target materials and is controlled by a 4 to 20 mA input. This gives the opportunity to adjust the emissivity setting automatically from a programmable logic controller (PLC). Alternatively the emissivity setting can be adjusted manually using the OS210-PT. If the 4 to 20 mA input is left open or short-circuit the emissivity setting defaults to 0.95. Refer to accessory chart on J-3 for NIST calibration ordering information.

PDF et manuels

OS212_spec OS212 View More

View Less

Conformité