1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
STH-SST-SWH
Ruban chauffant en fibre de verre 1400 °F max et 120-240 volts
Modèles en stock
- Qualité supérieure
- Classé pour 1400°F en continu
- Température d'exposition à court terme hors tension jusqu'à 1450°F
- Isolé Samox
STH-SST-SWH
À partir de
C$
69.96
Modèles en stock
Aperçu du produit
- Rigidité diélectrique au-delà de 2000 V
- Caractéristiques nominales du boîtier IP5X
- Température d'exposition maximale 760 °C
- Largeur du chauffage 0 in
- Jauge de l'élément chauffant 36 à 40 AWG
- Jauge de l'élément chauffant Remarque Fil résistif finement multibrin de calibre 36-40
- Isolation Double tressage Samox
- Température du conducteur, max 260 °C
- Direction de sortie du fil conducteur Remarque Émergent de bouts opposés vers des côtés séparés du connecteur moulé intégralement séparé. La température maximale pour les fils conducteurs est de 260 °C (500 °F).
- ID de série STH-SST-SWH
- Type de thermostat Non intégré
- Longueur du fil 24 in
Le ruban chauffant en fibre de verre STH-SST-SWH est conçu pour une utilisation continue jusqu'à 1400 °F et une exposition de courte durée jusqu'à 1450 °F lorsqu'il est hors tension. Il est doté d'une isolation Samox et fonctionne sur 120-240 volts avec un élément chauffant de calibre 36 à 40 AWG. Conçu pour le chauffage d'entretien avec un indice de protection IP5X, il garantit une durabilité et des performances fiables dans des environnements exigeants.
ATTENTION ET AVERTISSEMENT !
Une utilisation incorrecte ou une installation ou une utilisation par du personnel non qualifié peut entraîner un incendie ou un choc électrique.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
SEALEC Ecuador from
awesome heat conduction
We bought this product for my cousin in SA. He has a mechanical seals manufacturing business. The only way to make a permanent seal is with heat...we could not find a more effective product with awesome heat conduction for this purpose. It works like magic.
Date published: 2017-02-11
Rated 5 out of
5
by
Testers from
New appliance
Works on dioxane need double element for sulfuric acid
Date published: 2018-11-30
Rated 5 out of
5
by
Reynold from
Effective heating tape!
The heating tape works as advertised and was easy to install.
Date published: 2026-01-06
Rated 3 out of
5
by
MBE grower from
Dies early and often, even at 1/4 of rated power.
Pretty expensive for something so fragile. Even run at 1/4 of total rated power, these only seem to last about 1 year.
Date published: 2025-07-12
Rated 5 out of
5
by
JesseMER from
1/2" heater tape
Excellent quality, short lead time for a much better product than you can get at McMaster or Amazon
Date published: 2023-09-04
Rated 5 out of
5
by
Tape for fluid from
Heating tape
Very good quiality, the tape works well and we have some of the same brand and are in perfect status
Date published: 2023-02-09
Do these flexible heaters have CSA certificate for application in Canada?
Hi Hossein,
Thank you for the inquiry. These do not include CSA certificate unfortunately.
Best regards
OMEGA
Date published: 2022-01-21
Is 1400F (760C) mean reusable temperature or one-time?
The Heater tape will have to be attached to a Thermally Conductive surface across it's full length. What temperature that can be reached will depend on the Thermal mass and the Wattage of the specific Heater Tape. Once in place it is best to leave it in place as there will be some embrittlement. Running the Heater at full Voltage and power will reduce its expected useful life.
Date published: 2023-03-19
Can Ultra-High Temperature Heating Tape be used to heat a pipe will be buried under ground?
The Ultra-High Heating tape is not recommended for underground or wet environments. Look at self regulating or constant Wattage Heater tapes as a possible alternative.
Date published: 2022-04-07
What is a reliable temperature controller to use with heating tapes (Heating Tape STH051-080 for example? I am currently using an obsolete CN 9111A controller. These controllers worked fine but did not last very long (Mechanical relay and not SSR).
Thank you for your inquiry. The CN9111A suitable replacement would be a CNi1644 coupled with a SSRL240DC10 solid state relay.
Date published: 2023-05-04
Is this product UL US listed?
Thank you for your inquiry. This product is not UL listed.
Date published: 2026-01-02
Is the supply voltage for this heater AC or DC?
Thank you for your inquiry. This heater requires 120 Vac.
Date published: 2024-02-12
Hello! what is the difference between 120 or 240 volts? the size of the wire or its just the 240 volts does not come with a connector (model SST051-040) THANK YOU FOR YOUR TIME
Thank you for your inquiry. The difference is that 240V Version does not come with a plug.
Date published: 2022-10-11
Is the fiberglass insulation enough to prevent electrical shorting on conductive surfaces?
The Fiberglass insulation on the STH and SWH models provides the electrical insulation needed to be able to be use them on conductive surfaces.
Date published: 2021-11-16