1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DHT
Ruban chauffant à double élément 1400 °F max et 120-240 volts
Modèles en stock
- Chauffage à double élément
- Se connecte facilement à votre choix de contrôle de température
- Large gamme de tailles
DHT
À partir de
C$
135.15
Modèles en stock
Aperçu du produit
- Applications Béchers, Distillateurs, Flasques, Éprouvettes graduées, Verrerie de laboratoire, Tuyaux
- Caractéristiques nominales du boîtier IP5X
- Température d'exposition maximale 760 °C
- Isolation Fibre de verre
- Direction de sortie du fil conducteur Identique
- Option de construction du matériau N/A
- ID de série DHT
- Longueur du régulateur de température 230 mm
- Contrôleur de température Remarque Contrôleur de température requis : Comprend des attaches haute température de 230 mm (9") de long pour une installation facile
- Type de thermostat Non intégré
La série DHT est un élément chauffant double à plusieurs brins très flexible et durable qui fournit une chaleur uniforme sur toute la bande. Elle est renforcée par de la fibre de verre haute température pour plus de résistance et de durabilité. Températures élevées et réponse thermique rapide avec une température d'exposition maximale de 760 ºC (1400 ºF).
Afficher les évaluations et les avis
Rated 5 out of
5
by
Nicpuma from
Very good tool!
I bought this article one a few weeks ago and we used for long run test. It perfomed very well without issues or performance loss.
Date published: 2017-03-13
Rated 5 out of
5
by
Steven from
CEO
I have using it to heat up electrical PVC pipes from size 0.5 to 3 ". Cheaper, faster and easier then other special devices. Only one Omega product, it can be replaced for 3 others in application to heat up then bend PVC pipes.
Date published: 2018-11-10
Can you cut and make this a shorter length?
Hi MRA1
Thank you for the inquiry. Unfortunately we are unable to cut these to shorter lengths.
Best regards
OMEGA
Date published: 2021-10-27
Can I use this with omega bench top controller ?
Thank you for your inquiry. You can use a benchtop controller. Make sure the current draw from the heater does not exceed the controller's relay current rating.
Date published: 2023-10-31
Can this be connected to your omega cn7523 temperature controller? Or does it require some kind of hub for the 120v plug end?
Thanks for your inquiry. Most of our rope heaters have stripped ends and can be directly connected to controllers such as the CN7523; this heater has a formed plug at the end. In order to use w/ this controller and others of its type, you will need to cut the plug off, and wire according to manual instructions. There is no receptacle on the CN7523 that will directly take this heater plug connection.
Date published: 2021-10-27
Good day, Could you please help us out confirm that we can connect a heater DHT101080LD with this variac for temperature controller? https://www.amazon.com/gp/product/B0D5461Z23/ref=sw_img_1?smid=A2D6EDL5MBTI2K&psc=1 Thank you very much for your help.
Thank you for your inquiry. These heaters can be used with a variac. We recommend you use a temperature sensor and meter along with it.
Date published: 2024-06-12
Does this product come with a CSA/ULc or equivalent approval?
Hi Dheaven72
Thank you for the inquiry. This product is not CSA/ULc or equivalent approved.
Best regards
OMEGA
Date published: 2022-06-08