1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
TXDIN70-Series-Tx
Transmetteur de Température 2 voies Montage Sur Rail DIN
Modèles en stock
- Fournit des transmetteurs ou isolateurs de signal à deux canaux (4 à 20 ou 0 à 20 mA)
- Types et plages d'entrée programmables avec l'affichage externe optionnel (nécessaire pour programmer l'unité - le numéro de modèle est TXDIN70-DISPLAY)
- Montage sur rail DIN
- Les entrées ne sont pas isolées - Utiliser uniquement des capteurs thermocouples NON MISES À LA TERRE
TXDIN70-Series-Tx
À partir de
C$
220.78
Modèles en stock
Aperçu du produit
- Précision ± 0.3 %
- Précision Précision de la retransmission : 0,3 % de l’échelle complète ±1 chiffre (y compris l’erreur d’entrée et de sortie)
- Homologations CE
- Dérive < 0,01 % FSO/°C
- Puissance électrique 0 à 22 mA
- Norme CEM CEI 61000-4-4, CEI 61000-4-5
- Hauteur 100 mm
- Longueur 100 mm
- Montage Montage sur rail DIN
- Nombre d'entrées 2
- Température de fonctionnement, max 60 °C
- Température de fonctionnement, min -10 °C
- Détails de la sortie Peut être défini librement dans la plage de 0 à 22 mA avec une tension de sortie maximale ≥11V
- Signal de sortie Courant
- Valeur de sortie Processus
- Consommation électrique max. 3 W
- Humidité relative ≤90 % HR
- ID de série TXDIN70-Series-Tx
- Type d'approvisionnement électrique CA / CC
- Poids 85 g
- Largeur 22.5 mm
Il fournit 2 canaux d'entrées configurables et prend en charge plusieurs entrées de tension, RTD et thermocouples avec compensation automatique de la jonction de référence. S'il est connecté en parallèle à une résistance externe de précision, il accepte l'entrée de signal de courant. Chaque canal dispose de son propre filtrage numérique et peut ajuster son degré de filtrage.
- Il génère deux sorties de courant isolées, de 4 à 20 ou de 0 à 20 mA. La plage de sortie de retransmission peut être définie librement.
- Le modèle est monté sur rail DIN. Sa largeur n'est que de 22,5 mm. L'instrument peut être facilement configuré en le connectant à notre écran portable E8.
- Alimentation universelle de 100 à 240 Vca ou 24 Vcc.
PDF & Manuels
Accessoires
accessories
Affichage externe enfichable (l'affichage est requis pour programmer le transmetteur). L'affichage est livré avec câble
C$73.99 / each
70 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Accidental Gardener from
Great value & space saver for cost
I have a hobby greenhouse for peppers, tomatoes, peas, beans, carrots & cucumbers over the past 5 years. As a retired Instrument Technician (who enjoys the trade) I've mostly automated the greenhouse with used surplus instrumentation. After having some drifting issues with previous temperature xmtrs, I tried my luck with a pair of these TXDIN70-24 xmtrs & a Display unit 3 years ago. I was very pleased with the ease of setup, dual inputs & DC power version (I didn't want any AC influence on my T/Cs). I measure outside & various inside temps which are processed by these xmtrs before being passed on to other controls. A couple of years back I made a pair of removable mini greenhouses that I call 'Table-Frames'. They are tied together with 3" PVC dryer hose. Each has a removable wood framed glass roof & a 150W heater (earlier purchased from Omega that is pulse duration controlled via a PLC. A small fan in the left T-F recirculates the air. I use these to keep some seedlings just above freezing as the GH does go below freezing over the winter. These are removed late Spring to make room for other plant pots. I've since purchased another 2 TXDIN70-24s for each T-F as well as the deep Carrot bin soil temps.
Date published: 2020-04-29
Rated 4 out of
5
by
joshtibb from
Needs to Be Packaged w/ Programmer
Works well now, after a second purchase and additional $19 in shipping for programmer. A little frustrating that the signal conditioner comes without the programmer, and you have to order it separately. It seems like if you are familiar with the product, you should be able to special order it without the programmer, not the other way around where you are psyched for the modules price point, order it, get it on hand, and find you have to pay another $45+ dollars (including shipping) to simply use it.
Date published: 2018-07-26
Rated 2 out of
5
by
Jess01 from
FINE PRODUCT BUT STUPID ADD ON'S
GOOD PRODUCT BUT YOU HAVE TO BUY THE PROGRAMMING UNIT WITH IT TOO
Date published: 2020-04-02
Rated 5 out of
5
by
Ken S from
Great price and easy to program.
I used this transmitter to replace 2 ABB single channel units on RTD's at a quarter of the price. Very easy to program once I played around with the controller a bit.
Date published: 2020-03-23
Rated 5 out of
5
by
Revive Energy from
Great Value
Extremely versatile TC transmitter. Works for virtually any type of thermocouple. Uses 120 VAC power. Easy to program for any range of operation. Provides stable, noise free mA signal to process and data acquisition and recording systems.
Date published: 2018-06-17
Hello, Omega, I would like to ask whether TXDIN70 can be connected to the computer for data collection
Hi bao77,
Thank you for the inquiry. Unfortunately this device has no communication options for data collection.
Best regards
OMEGA
Date published: 2022-09-08
I am going to have this connected to an ABB ACS800 via loop power. How do i wire it up so that the output is transmitted correctly? At the moment i have loop power coming into the transmitter at terminals 1 & 2.
Hi ITT EMD,
Thank you for the inquiry. Unfortunately this unit will not work in a loop powered configuration. For assistance locating a loop powered transmitter please email TEMP@OMEGA.COM.
Best regards,
OMEGA
Date published: 2022-10-04
I'm measuring the temperature of electrically live components up to 700 VDC and VAC, and I'm look at using a few of these to isolate the signal so I can measure the TC's with a DAQ system. What is channel to channel isolation of this unit?
Hi Cwitry
Thank you for the inquiry. TXDIN70 inputs are not isolated from each other. Please forward your request to our data acquisition group at DAS@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-10-08
Does this product have UL or CSA certification?
Thank you for your inquiry. This product has no UL or CSA certification.
Date published: 2020-02-12
What is the standard temperature at which the specifications are defined? For example, the Temperature Drift is stated in %FS/Degree C. For me to provide an Uncertainty Calculation it is require to know the difference between operating and spec temp.
Hi Lonzo,
Please forward this question to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-09-10
hello, This unit TXDIN70 i'm using did not transmit analog output, even display shows correct temperature. Happens on both output. Please advise.
Hi Adli,
Most likely problem is the output wiring. Please review terminal connections for outputs. Second possibility could be the output scaling selected. Please review settings. Manual gives an example output scaling for reference. For more assistance please call us in the temperature group. 800-359-1660 and ask for the temperature tech support group.
Best regards
OMEGA
Date published: 2020-02-25
Can this be programmed with a computer? You have no TXDIN70-Displays available to purchase.
Thank you for the inquiry. Unfortunately the TXDIN70 cannot be programmed with PC connection. Lead time for the module is 3 weeks.
Best regards,
OMEGA
Date published: 2022-12-29
After connecting K type thermocouple, the PV is correct on display, but SV is flickering, Please advise what setting is wrong. Thanks
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards,
OMEGA
Date published: 2023-06-19