1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DR-IO-IAC-R0-280N
Modules d'entrée/sortie de conversion de tension : Convertir les niveaux TTL en niveaux PLC et les niveaux PLC en niveaux TTL
Choisir une variante
Plage de mesure de tension
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Hauteur | 60 mm |
| Homologations | CE, CSA, UL |
| ID de série | DR-IO-Sig-Cond-TTL-to-PLC |
| Isolation | 4000 Vrms |
| Largeur | 7.5 mm |
| Logique | Négatif |
| Longueur | 80 mm |
| Montage | Rail DIN 35 mm standard « C » ou chapeau haut |
| Nombre d'entrées | 1 |
| Plage de mesure de tension | 90 à 280 Vca |
| Température de fonctionnement, max | 70 °C |
| Température de fonctionnement, min | -30 °C |
| Température de stockage, max | 100 °C |
| Température de stockage, min | -40 °C |
| Type d'entrée | Numérique |
| Valeur brute du poids | 0.07 |
| Pays d'origine | Mexico |
| Voir toutes les spécifications | |
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
Bairdf from
Low turn on current
I use these as solid state relays with the NI 9403 5V TTL DIO module. The problem I have always had is that the module only outputs 2mA per channel. These DR-IO modules let me go directly from the TTL signal to a 3A 208V powered device. If I need more than that I can used them to turn on a larger relay. The internal fuse make them a great space saver too.
Date published: 2016-02-16
Rated 5 out of
5
by
Joel Muniz from
Everything looks fine
Material arrived on time, good service and attention
Date published: 2023-10-05
Rated 5 out of
5
by
Kristina from
Quick Delivery
Fast delivery and exactly what we needed. Good quality.
Date published: 2023-05-11
Rated 1 out of
5
by
Anonymous from
output charge leak without control signal
These modules leak a low level charge without no control signal applied.
This is not noticeable with mechanical relays due to the low impedance which allows the charge to bleed without enabling the relay. However, with a sold state device with an high impedance will see a voltage on the input without a control signal applied.
Date published: 2020-10-29