1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DMD4059-Series-Sig-Cond
Conditionneurs sur rail DIN convertissant les entrées de pont en mA ou en tension
Modèles en stock
- Montage standard sur rail DIN
- Zéro et étendue non interactifs
- Configuration rapide - Plus de 100 plages d’E/S
- Connecteurs amovibles
DMD4059-Series-Sig-Cond
À partir de
C$
884.83
Modèles en stock
Aperçu du produit
- Réglages ±5 % via potentiomètre à plusieurs tours
- CMRR 100 dB min
- Connexion électrique Borne à vis
- Puissance électrique 0 à 25 mA
- Caractéristiques nominales du boîtier IP40
- Hauteur 117 mm
- Isolation 1200 Vrms minimum, isolation 3 voies, alimentation vers entrée, alimentation vers sortie et entrée vers sortie
- Longueur 122 mm
- Montage Rail DIN standard 35 mm
- Décalage Dérive du point zéro (tare) : ± 100 % de la plage par incréments de 15
- Température de fonctionnement, max 60 °C
- Température de fonctionnement, min -10 °C
- Ondulation de sortie Meilleur que ±0,1 % de la plage, ondulation et bruit <10 mV rms
- Valeur de sortie Processus
- Consommation électrique 2 à 5 W
- Précision de la résistance Meilleur que ±0,01 % par changement de 1 Ω de la résistance du fil de liaison
- ID de série DMD4059-Series-Sig-Cond
- Stabilité ±0,01 % par °C, thermique : meilleur que ±0,02 % de l’étendue par °C
- Type d'approvisionnement électrique CA / CC
- Stabilité de la température ±0,01 % par/°C ; Meilleur que ±0,02 % de la plage par °C
- Poids 159 g
- Largeur 22.5 mm
- Calibre du fil 14 AWG
Le DMD4059 accepte une entrée provenant de capteurs à pont de Wheatstone, de transducteurs de pression ou de cellules de charge. Il filtre, amplifie et convertit le signal d'entrée en millivolts en une tension ou un courant continu sélectionné qui est linéaire par rapport à l'entrée. L'isolation à 3 voies de 1200 V élimine les boucles de masse, les tensions de mode commun et réduit considérablement la captation du bruit. Des connexions de fils de détection sont disponibles pour offrir une précision maximale. L'entrée, la sortie, l'excitation et la dérive du point zéro sont configurables sur le terrain via des commutateurs rotatifs et à glissière externes. Des décalages allant jusqu'à ± 100 % de la plage peuvent être utilisés pour annuler les décalages des capteurs ou tarer les charges fixes. Des fonctionnalités telles que des LED rouges et vertes d'intensité variable indiquent l'activité d'entrée et de sortie, et un bouton de test de sortie facilite la configuration et le dépannage.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
Anonymous from
Easy setup and works well
The signal conditioner is easy to setup and works well.
Date published: 2026-02-06
Rated 3 out of
5
by
Josh L from
No Cal Cert
Contrary to what is claimed when you call customer service ahead of time, this item does not include a calibration data or certificate.
Date published: 2026-01-28
Rated 5 out of
5
by
Mark Marley from
DIN Rail Conditioner Review
Item was readily available, easy to order, shipped on time and is working as expected.
Date published: 2025-12-04
Rated 5 out of
5
by
mason from
great component
This item works exactly like I need it to. No issues, arrived quickly.
Date published: 2024-08-26
Rated 5 out of
5
by
Janice from
The Brand you want to use.
Quick Friendly Service. Alway a pleasure working with Omega
Date published: 2023-05-26
Rated 5 out of
5
by
Rand from
Strain gage Signal Conditioner!
Excellent quality and quick service.. Exactly what we needed. Great follow up by Omega.
Date published: 2023-04-24
Rated 5 out of
5
by
Enoch G from
Great Product with Support
This signal conditioner has a wide range of variable inputs and outputs. It is slim on the din rail so not much space is taken up. Made in the US. Support is readily available as opposed to other similar product manufacturers.
Date published: 2023-02-08
Rated 3 out of
5
by
JoseB from
Strain Signal Conditioner
Seems decent. Simple instructions, and wiring diagram. Worried vibration will cause the zero drift.
Date published: 2022-09-26
Is this a single or multi-channel device? We would like to connect 4 load cells with different readings. Will 1 device be able to output each individual reading?
Hello, this is a single channel device, (you may use upto 4 load cells PROVIDED you are using a summing box, that sums the output of all four load cells).
In your case if you need outputs from each load cell, then you will need four separate signal conditioners.
Date published: 2024-12-17
On the DMD4059-DC model, I have one that reads almost the same pressure all the time when extruder is hot. When it is cool, the reading does not drop off. I have plugged new pressure transducer into it and it still does not read zero or anywhere close.
We suggest you call us at 1-800-826-6342 to troubleshoot your system over the phone. Ask for the Pressure Engineering Group
Date published: 2021-08-24
what are the dimensions of the DMD4059-DC?
Hi, thanks for connecting with Omega. In response to your question: Dimensions are as follows, 0.89 W x 4.62 H x 4.81" D (22.5 W x 117 H x 122 mm D), Height includes connectors. Please contact our Tech Support if you have any further questions.
Date published: 2019-06-05
I am facing issue connecting Load cell to DMD4059-DC, whenever I connect load cell its input LED goes off also not getting any output signals. Can anyone help with troubleshooting?
The green input LED provides a visual indication that a signal is being sensed by the input circuitry of the module. It also indicates the input signal strength by changing in intensity as the process changes from minimum to maximum.
If the LED fails to illuminate, or fails to change in intensity as the process changes, check the module power or signal input wiring. Note that it may be difficult to see the LEDs under bright lighting conditions.
The red output LED provides a visual indication that the output signal is functioning. It becomes brighter as the input and the corresponding output change from minimum to maximum.
For current outputs, the red LED will only light if the output loop current path is complete. For either current or voltage outputs, failure to illuminate or a failure to change in intensity as the process changes may indicate a problem with the module power or signal output wiring.
Make sure that you have a jumper wire between 6 and 12. Please see wiring for "No Sense Leads" in the manual.
Make sure the resistance across the red and black wires in the load cell are 350 ohm.
Make sure the resistance across the green and white wires in the load cell are 350 ohm. (approximately)
For more in depth troubleshooting please email pressure@omega.com
Date published: 2024-12-20
For the DMD4059 Strain Gauge to DC Signal Amplifier, is this model able to handle a switching power supply? If it's supply voltage type is DC and it's given an alternating current, what would happen?
Both variants of the DMD4059 will run on AC or DC. The DMD4059-DC Low power version will run on 9 to 30 VDC or 10 to 32 VAC. The Standard DMD4059 will run on 80 to 300 VDC or 80 to 265 VAC. They will not work with a switching power supply.
Date published: 2020-11-11
Data sheet says "The DMD4059 accepts an input from 1 to 4 strain bridge sensors" - what is this? It only has 1 output - are the sensors in parallel? Is there a diagram of how to do this? Can it provide excitation to several sensors that use other amps?
Thank you for your question?
The unit will only power up to 4 sensors.
You are correct that the unit will only take one input.
Hope this was helpful.
Date published: 2023-06-14
DOes this device have noise filter? If so what is its cutoff frequency? To what EMI standard is it qualified for?
Thank you for your inquiry, The DMD4059 provides some filtering for stabilizing the signal. For more in-depth information about the filter please contact our Technical Support department @ support@omega.com
Date published: 2021-11-01
I'm trying to read the strain from a single strain gage. Can this device be used for that, or does it only work on a full bridge?
Daniel, The DMD4059 unit will work only with full bridge circuits, if you have a single strain gauge you may complete the bridge using a bridge completion module like the BCM-2-350R (assuming you have a 350 ohm strain gauge)
Date published: 2024-07-29