1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-62-Series
Enregistreur de données compact USB de température et d'humidité relative
Compact USB Temperature and Relative Humidity Data Logger
Modèles en stock
- Mesure simultanée de la température, de l'humidité relative et du point de rosée
- Alarme de température et d'humidité avec indication visuelle à la demande
- Arrêt sélectionnable par l'utilisateur lorsque la mémoire est pleine ou lorsqu'elle est saturée pour un enregistrement continu
- Contrôle de l'enregistrement par PC ou bouton-poussoir
OM-62-Series
À partir de
C$
231.49
Modèles en stock
Aperçu du produit
- Remarque sur l'alarme Seuils d’alarme haut et bas programmables, pour la température et l’humidité
- Autonomie de la batterie jusqu'à 2 ans
- Taille et type de batterie CR2032 ; 3 V Li-ion
- Étalonnage La calibration du décalage en un seul point est disponible via le logiciel pour la température et l'humidité.
- Interface de données USB
- Facteur de forme Portatif
- Hauteur 15 mm
- Longueur 76 mm
- Type de mesure Point de rosée ; humidité ; température
- Mémoire 43344
- Remarque sur la mémoire 43 344 pour la température seulement; 21 672 pour la température et l’humidité
- Précision de l'humidité relative ± 2 % HR
- Remarque sur la précision de l'humidité relative ± 2 % HR de 10 à 90 % HR
- Humidité relative, max 0,99
- Humidité relative, min 0%
- Résolution de l'humidité relative 0,0001
- Type de capteur d'humidité relative Polymère capacitif
- Échantillons, max 22000
- Fréquence d'échantillonnage 1 Hz (1 mise à jour/seconde)
- Note sur la fréquence d'échantillonnage Sélectionnable par l'utilisateur de 1 seconde à 18 heures, par incréments de 1 seconde
- ID de série OM-62-Series
- Compatibilité logicielle Windows® XP/VISTA/7 et 8 (32 et 64 bits)
- Température de stockage, max 70 °C
- Température de stockage, min -40 °C
- Type d'approvisionnement électrique Batterie
- Précision de la température ± 1,0 °C
- Mesure de la température, max 70 °C
- Mesure de la température, min -40 °C
- Résolution de température ± 0,1 °C
- Type de capteur de température Intégré
- Remarque sur le type de capteur de température Capteur numérique interne
- Précision temporelle ± 100 ppm à 75°F
- Poids 28 g
- Largeur 40 mm
The OM-62 temperature/relative humidity data logger is an easy-to-use, versatile device which can be used for a wide range of logging applications. The OM-62 is capable of sampling as fast as once per second or as slow as every 18 hours. A total of 43,344 temperature measurements can be stored in the data logger memory if only temperature is measured, or 21,672 measurements for temperature and humidity.
In addition to measuring temperature and relative humidly, the easy-to-use Windows software included with the OM-62 data logger calculates and displays the dew point temperature. The software is a full-featured program that allows you to set up all data logger functions including sampling rate, logging duration, start mode, logging mode, and high and low temperature and relative humidity alarm values.
Once data has been logged, the program then allows you to download data from the logger, plot the data and export the data to an ASCII text or Excel file format for further analysis.
In addition to measuring temperature and relative humidly, the easy-to-use Windows software included with the OM-62 data logger calculates and displays the dew point temperature. The software is a full-featured program that allows you to set up all data logger functions including sampling rate, logging duration, start mode, logging mode, and high and low temperature and relative humidity alarm values.
Once data has been logged, the program then allows you to download data from the logger, plot the data and export the data to an ASCII text or Excel file format for further analysis.
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 4 out of
5
by
AbudieyehM from
small size and great efficiency
My experience with this instrument is short but up to date it works very well.
Date published: 2016-03-05
Rated 5 out of
5
by
Rachel C from
OM-52
The Portable Low-cost Temp /Rel. Humidity Loggers are a little too sensitive to jarring like when the trucks have to go on bumpy roads.
Date published: 2020-04-13
Rated 1 out of
5
by
Congman from
Very Slow to respond and short life span
These are old technology and very slow to respond. They have to be downloaded to get data and the info is not accurate to the time it was gathered. Changes in environment may take 10 min to show up on the data loggers report and at high and low ranges may take an hour or more to respond.
Date published: 2019-04-15
Rated 4 out of
5
by
Duracell Engineering from
Logger
Good device, intuitive SW. Good device, intuitive SW.
Date published: 2018-12-03
What is the accuracy when it is greater than 90% relative humidity?
Thank you for your question. There is no accuracy specification outside of the range of 10- 90 % Rh.
Date published: 2024-05-06
I have OM-62 and I'm on Windows 10 I have tried with several software to make it works. Can somebody send me the right one for this device. Regards.
Hello, the Software link is listed under the 'Product Specs' on the OM-62 Product Page. Please call our Tech Support to help troubleshoot and get you up and running. 1-888-826-6342 | 1-203-359-1660 (US & Canada).
Date published: 2019-10-03
Can OM-62 units be purchased with, or do they come with calibration certs?
Thank you for your question. We provide a Cal-1 ( certificate of conformance).
Date published: 2022-10-11
We are trying to run a OM-63 Temperature Data Logger on Windows 10 and get an error 300 dialog box. We do not and will not have administrator priviledges and the interwebs have a couple indications this is the problem. How can we resolve this?
Hello,
Disconnect the USB cable,
Go to your Windows Start Menu,
Click on My computer (or it may be just computer)
Click on the “C” drive
Click on Program Files (X86)
Click on the Omega Log Folder (Maybe just Omega)
Click on the USB Driver Folder
Click on the executable file and run the installation (This will happen very quick you may not even notice it more than just a flash)
Close everything out
Plug the USB cable back in
Wait a minute or so to let the driver fully load,
Launch the software and try to communicate.
Date published: 2021-10-08
Is this device capable of measuring in 0.1’C increments?
Yes, it is capable. We also offer the new OM-HL-SH series with more features.
Date published: 2019-01-09
Hello. I am wondering if this device would be suitable to monitor the temperature in a vaccine storage unit. What I want to know is if the refrigerator goes outside of 2'-8' C, will I be able to accurately determine for how long it was out of range?
Please note if you want to record the data, then OM-63 is ideal. However, If they want an alarm to tell you when your unit went out of range without accessing the data, then this is not the unit for them. What they really need in that case is the OM-THA2. The OM-THA2 with both provide an alarm AND record the data. https://www.omega.com/pptst/OM-THA2-U.html
Date published: 2019-01-30