Besoin d'aide? Appelez-nous: 1-800-663-4209
RTDM12
Sonde RTD compacte avec filetage de montage et connecteur M12
Modèles en stock
- Extrêmement robuste
- Connecteur moulé (IP67) à 4 broches avec filetage mâle M12
- Temps de réponse rapide*
- -50 à 120 °C (-58 à 248 °F)
RTDM12
À partir de
C$
74.55
Modèles en stock
Aperçu du produit
- Connexion électrique M12 4 broches mâle
- Caractéristiques nominales du boîtier IP67
- Résistance d'isolation 100 MΩ
- Remarque concernant la résistance d'isolation 100 MΩ avec 100 VCC
- Nombre de fils 4
- Pression, max 40 bar
- Diamètre de la sonde 3 mm
- Taille du raccordement au process 1/8 po
- Température maximale du processus 120 °C
- Température minimale du processus -50 °C
- Temps de réponse 5 s
- ID de série RTDM12
- Type de capteur de température RTD
- Type de thermocouple N/A
Ce capteur RTD à fiche est idéal pour les applications dans les récipients sous pression, les conteneurs pressurisés et les applications nécessitant un capteur de température avec un montage NPT. La conception à élément unique comprend une sonde en acier inoxydable 316 d'un diamètre 1/8' qui s'étend sur 13 mm (0,51') ou 24 mm (0,94') à partir d'un filetage de montage NPT 1/8 NPT montage. Le connecteur M12 assure une connexion très fiable. Des câbles d'extension sont proposés en différentes longueurs, avec des angles droits ou droits.
PDF & Manuels
Accessoires
accessories
Convertisseur compact de courant ou tension analogique vers IO Link
C$245.46 / each
80 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
dbech1 from
Good Sensor
Easy to find and at a good price. Online catalog was easy to navigate.
Date published: 2018-02-13
What is the maximum recommended cable length for these RTDs?
Thank you for your inquiry John. You can use the 3 m long M12CFM-P24STPC-SFSR-FL-3 cable or the 20 m long M12CFM-T24SSPC-SFSR-FL-20 cable with this probe without any issues. Anything longer than these cables, the wire gauge and the wire length would introduce error into the measurement.
Date published: 2022-06-26
Can this temperature used to measure the hot air temperature flowing in a duct or pipe?
Yes, the RTDM12-1/8NPT-3MM-13MM-A can be threaded into a pipe or duct to measure hot air flow.
Date published: 2019-10-15
Can the sensor and the M12 connector be submerged in water ?
Thank you for your inquiry. M12 connectors comply with protection class IP67. This allows for protection from water immersion at a depth of 1 meter maximum for no more than 30 minutes.
Date published: 2024-08-01
What is the accuracy of this probe?
Thank you for the inquiry. Accuracy is IEC 751 class A +/- (0.15 C + 0.2% of reading)
Best regards,
OMEGA
Date published: 2023-10-29
What other accessories are required with this probe to connect it to a Raspberry Pi?
Thank you for the inquiry. Please forward this request to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2023-10-29
can this probe be used with a controller that accepts 2 or 3 wire inputs
Thank you for your inquiry. Yes these can still be used with devices that accept less RTD wire input.
Date published: 2023-10-18
Is the Compact RTD compatible with the CND3 Temperature and Process PID Controller?
Yes, the CND3 controller will take the input signal from this sensor.
Date published: 2020-03-13
What is the temp coefficient for this? Is it the standard 0.00385 ohm/ohm/C?
Thank you for your inquiry. Yes, it is the European curve 0.00385.
Date published: 2023-08-17