1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
WT4401-Wind-Tunnel
Tunnel à vent en boucle ouverte de 45 m/s sur banc d’essai avec chambre d’essai de 6 po x 4 po x 4 po
- Precise motor control for adjusting flow rates
- Highly accurate to 1% of reading
- Large 101.6 x 101.6 mm (4 x 4") test chamber
- Highly stable delta pressure Sensor and readout included with each wind tunnel
WT4401-Wind-Tunnel
À partir de
C$
24,344.18
Aperçu du produit
- Précision ± 1 %
- Précision 1 % de la lecture (2 % de la lecture avec plaques restrictives)
- Fonctions supplémentaires 1 Capteur de pression différentielle PX657 127 mm (5") H2O et compteur DP41-S-A avec sortie analogique dans un boîtier de table
- Réglages Minimum, Maximum, accélération et limite de courant
- Dimensions du boîtier de commande 140 W x 184 L x 89 H mm
- Longueur 1.5 mm
- Débit linéaire, min 0.15 m/s
- Courant du moteur 12 A
- Vitesse du moteur 10 000 tr/min
- Tension du moteur 120 Vca
- Échelle de niveau de bruit 95 dBA
- ID de série WT4401-Wind-Tunnel
- Réglage du point de consigne Potentiomètre à 10 tours
- Poids 22.5 kg
- Remarque sur le poids Soufflerie : 22,5 kg (49,5 lb) ; Électronique standard 3,2 kg (7 lb) ; Électronique de luxe 7 kg (15,3 lb)
- Largeur 431.8 mm
This benchtop open loop WT4401 wind tunnel features a 6 in x 4 in x 4 in test chamber and delivers airflow speeds up to 45 m/s with ±1% accuracy. It includes a high-speed motor running at 10,000 RPM, providing precise and reliable aerodynamic testing. Compact and weighing 22.5 kg, it is ideal for laboratory and educational applications requiring controlled wind flow conditions.
PDF & Manuels
Afficher les évaluations et les avis
Is it possible to calibrate balometer using this tunnel
Can you provide an extension for the calibration of air capture hood .
Date published: 2023-09-18
Can you tell me the annual calibration cost for the WT4401-D and is the unit able to be disassembled for shipping back for calibration?
Thank you for your inquire
please contact the returns department for details on how this can be done.
Date published: 2022-03-11
Does the wind tunnel need yearly manual calibration for temperature and humidity?
Thank you for your inquiry! Calibration frequency can depend on a number of factors but in general yearly calibration for these parameters is recommended.
Date published: 2021-12-17
can you do a rotary type instrument with this unit? I.E. TSI RVA501 Thanks!
Thank you for your inquiry. Yes, rotating vane style anemometers can be used inside the chamber of this wind tunnel.
Date published: 2023-09-28
Is there a software interface for the analysis of drag and lift forces measurements on a sample (like aerofoil) ?
Thank you for your inquiry! Unfortunately, we do not offer any analysis software that will provide feedback on these parameters.
Date published: 2022-02-14