1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-VIB-101-Logger
Enregistreur de données de vibration/accélération USB 3 axes
Modèles en stock
- L'enregistreur de données montable utilise trois accéléromètres pour mesurer avec précision l'accélération des équipements en fonctionnement sur les axes X, Y et Z
- Stocke jusqu'à 327,600 points de données dans la mémoire flash
- Un seul bouton permet de démarrer/arrêter l'enregistrement des données sans PC
- Interface USB 2.0 plug-and-play : aucun câble, socle ou station d'accueil n'est nécessaire
OM-VIB-101-Logger
À partir de
C$
326.14
Modèles en stock
Aperçu du produit
- Échelle d'accélération ± 16 g
- Taille et type de batterie 3,6 V Li-ion
- Précision de l'étalonnage Accéléromètre : ±0,5 g
- Interface de données USB
- Réponse en fréquence 0 à 60 Hz
- Hauteur 54 mm
- Échelle d'humidité 5 à 95 % HR
- Indicateurs LED Les DEL rouges et vertes indiquent l’état de l’appareil (enregistrement, non-enregistrement, batterie faible, mémoire pleine)
- Longueur 113 mm
- Mémoire 327600 points de données
- Remarque sur la mémoire 327 600 points de données dans une mémoire flash de 16 Mo
- Échelle en millivolts N/A
- Nombre de mesures 3
- Température de fonctionnement, max 45 °C
- Température de fonctionnement, min 0 °C
- Pression, max 0 psi
- Fréquence d'échantillonnage 20 Hz (20 mises à jour/seconde)
- Note sur la fréquence d'échantillonnage 50 ms à 24 heures
- ID de série OM-VIB-101-Logger
- Logiciel Windows XP SP3 / Vista / 7 et 8 (32 et 64 bits)
- Type d'approvisionnement électrique Batterie
- Poids 73.5 g
- Largeur 32.5 mm
L'OM-VIB-101 est idéal pour évaluer l'état et diagnostiquer les problèmes de performance des machines tournantes. De légères variations dans les accélérations axiales d'un moteur au fil du temps peuvent révéler si un moteur fonctionne efficacement et même indiquer s'il risque de tomber en panne à l'avenir. L'OM-VIB-101 utilise trois composants pour collecter et présenter les données de vibration :
1) Enregistreur de données USB de la taille d'une clé USB contenant trois accéléromètres de précision
2) Socle permettant de monter l'enregistreur de données sur un équipement en fonctionnement
3) Puissante application graphique compatible avec Windows®. Une fois l'enregistreur démonté, il suffit de le brancher sur le port USB d'un ordinateur pour importer automatiquement plusieurs heures de données sur les vibrations, les mouvements et les inclinaisons dans l'application.
1) Enregistreur de données USB de la taille d'une clé USB contenant trois accéléromètres de précision
2) Socle permettant de monter l'enregistreur de données sur un équipement en fonctionnement
3) Puissante application graphique compatible avec Windows®. Une fois l'enregistreur démonté, il suffit de le brancher sur le port USB d'un ordinateur pour importer automatiquement plusieurs heures de données sur les vibrations, les mouvements et les inclinaisons dans l'application.
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 1 out of
5
by
Giusi1 from
Lots of issues
The items works only when connected to a pc via usb
The twchnical stuff has been promising me a new set of instructions and i am still waiting
So far very bad review from my side
Regarda
Date published: 2017-04-18
Rated 1 out of
5
by
rph1 from
Horrible!
Spent a lot of time trying to get this thing to work. It would not work for more than a few minutes.
Had a online chat with the service department resulting in my returning the unit. Service Dept. testing the unit for a short while, while connected to the computer and had no problem. For this application, the unit will be attached to the equipment.
Note, I have several Omega temperature/humidity data loggers, which we have used successfully for several years.
Date published: 2017-12-27
Rated 1 out of
5
by
Tim M from
Too light to be a paperweight
This product is horrible. It does not do half of what is advertised (example is to set alerts). It is not very sensitive and doesn't communicate with computer half the time. You have to use a screwdriver remove the battery and reassemble in order to get communication back. All of the error messages in the software were clearly translated from another language as the translation is broken. Bottom line is I would highly recommend not purchasing.
Date published: 2017-05-01
Rated 2 out of
5
by
EngineerRobert from
Interface, Software and Instructions need work
It took 2 weeks to get it working at all on a time available basis. Omega had a non-windows 10 compatible version posted on the web at first. Very few newer laptops have a CD drive so the download verison is important. I can not get the unit to start recording with a button so I have to use the software to schdule a start time. The software is sloppy, spell check was obviously not used (Device is not spelled Deveice). Download is very slow, a full logger takes several minute to download. Memory is limited. For vibration I want to have a resolution that will give full amplitude and frequency which requires roughtly 10x the record rate of the vibrational frequency. At 250 ms i can only record 1 day. at 50 ms only a few hours. The instruction manual is not very helpful. I can not get the unit to record with zero as the centerline value even though I have "calibrated" it muliple times.
Date published: 2018-10-10
Rated 4 out of
5
by
Jclark from
Almost Perfect
Used the device several times since I purchased it had to learn the hard way that if you set in the parameters to start logging at a certain time but accidentally press the button before the timer and you get nothing unless you hook it back up to your computer.
There should be an option when you set the parameters to disable the button.
Date published: 2017-07-21
Rated 3 out of
5
by
Anonymous from
Good product with bad service!
The product was good. Only problem was the service.
Date published: 2021-02-15
Rated 3 out of
5
by
FriendlyNot4Me from
still a little large
Still a little too bulky for our operation. I'd like to see it in a more basic form with out the casing.
Date published: 2017-06-09
what windows operating system is this loggers software compatible with?
Thank you for connecting with Omega. Vibration/Acceleration Data Logger Software Version 3.0.2 is compatible with Windows XP/7/8/10.
Date published: 2020-09-28
What is the force range for the model? Will it handle +/-10G?
Thank you for your question. The range of the OM-VIB-101 is +/- 16 g.
Date published: 2020-09-28
An error ocurred while applying security settings. Administrator is not valid user or group. This could be a problem with the package, or a problem connecting to a connection and click "Retry", or "Cancel" to end the install
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-07-22
How long does it take to charge through USB? Also, what is the red LED light 'Alm" for?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2022-10-11
Is this waterproof?
Thank you for your question. The logger is not waterproof.
Date published: 2020-08-11
Dims without the mounting fixture? weight with the battery? I want to measure centrifugal acceleration up to 16g but it will be exposed to 2500g (5000rpm@3.5"). your OM dataloggers work in this condition but will this damage the accelerometer part?
Thank you for your question. Unfortunately, the logger will not work in this application.
Date published: 2021-10-25
What formats can the "Vibration/Acceleration Data Logger Software" export data in? Can the hardware unit be connected to a PC and visualize data in real-time?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-10-16
The device appears to be logging data correctly (based on the blinking LED). However when I open the software I cannot download the data from the sensor. When I plug the sensor in my computer it doesn't seem that the computer is installing a new device
Hello
More information may needed on this, please send request to das@omega.com
Date published: 2023-01-24