1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LC8250
Cellules de charge à compression, trou traversant de 2,5 po de diamètre extérieur
Modèles en stock
- Profil bas
- Étalonnage traçable NIST en 5 points avec
Données d'étalonnage du shunt 59 kOhm - Construction entièrement en acier inoxydable
- Conception industrielle robuste
LC8250
À partir de
C$
1,333.90
Modèles en stock
Aperçu du produit
- Étalonnage en 5 points 0%; 50%; 100%; 50%; 0%
- Longueur du câble 5 ft
- Option d'étalonnage 5 POINTS NIST
- Connexion électrique Câble
- Puissance électrique 2 mV/V
- Type de force Compression
- Déviation à pleine échelle 0.003 in
- Hauteur 1 in
- Résistance d'entrée 360 Ω min
- Linéarité ± 0,5 %
- Type de cellule de charge Trou traversant
- Matériaux Acier inoxydable 17-4 PH
- Température de fonctionnement, max 121 °C
- Température de fonctionnement, min -54 °C
- Diamètre extérieur 2.5 in
- Résistance de sortie 350 ± 5 Ω
- Surcharge, max 300 % FS
- Température maximale du processus 71 °C
- Température minimale du processus 16 °C
- Répétabilité ± 0,1 %
- Surcharge sécurisée 150 % FS
- ID de série LC8250
- Approvisionnement Remarque 10 Vcc, 15 Vcc maximum
- Tension d'alimentation 10 Vcc
- Effet de la plage thermique ± 0,018 % lecture/°C
- Effet thermique zéro ± 0,009 % FSO/°C
- Tableau de câblage/connecteurs Vert : sortie (+) ; blanc : sortie (−) ; noir : entrée (−) ; rouge : entrée (+)
- Erreur de zéro/équilibre ± 2 %
La cellule de charge à anneau de la série LC8250 est une solution économique pour les applications nécessitant une conception à trou traversant. Avec son profil extrêmement bas et sa conception compacte, cette cellule de charge est idéale pour des applications telles que les forces de serrage, les forces de chargement des boulons et autres charges de compression. Cette série, avec sa construction entièrement en acier inoxydable et sa protection environnementale, offre une fiabilité éprouvée dans les applications industrielles difficiles.
PDF & Manuels
Afficher les évaluations et les avis
Does it work with DP41-E? and what is the Pin out for the 4 conductor? if there is a manual to show the pin outs for the load cell.
It's not the best match for use with a load cell but the DP41-E will work. You will need to configure it for a 0 to 100 mV input range and set the internal sensor excitation voltage for 10VDC. Wiring of the load cell to the display is as follows. + Excitation to P9-1, + Signal to P9-2, - Signal to P9-3, - Excitation to P3-1. Do not jumper terminal P3-1 to P3-3. There is a full manual for DP41-E available for download on our website. You can access through the Manuals menu at the bottom of our homepage
Date published: 2022-03-24
Can you point me to a meter/indicator that is compatible with this load cell?
That you for your inquire
We have many meters that will work.
Here are just a few.
DP8PT,DP31PT,DP25B-S.,DP41-S
Please contact us directly for more options.
Date published: 2022-06-10
Is there any vertical displacement under load and if so do you have charts ploting vertical displacement as a function of load?
Nominal full scale deflection of the load cell when full load is applied is 0.005". We do not have data indicating deflection as a function of load.
Date published: 2022-10-07
What is the accuracy of this gauge?
Accuracy is 0.5% of the full scale load range of the unit
Date published: 2020-10-15
What is the wash down rating?
Hello, the LC8250 has a IP55 rating, it is not good for washdown applications since it is not watertight.
Date published: 2023-11-06