1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CND3-Series
Contrôleurs PID de température et de processus DIN 1/16, 1/8 et 1/4
Modèles en stock
- Modèle de base à partir de 80 $
- Temps d’échantillonnage rapide de 0,1 s
- Détection de déconnexion du chauffage
- Tous les modèles 1/4, 1/8, 1/16 DIN certifiés UL/cUL
CND3-Series
À partir de
C$
337.23
Modèles en stock
Aperçu du produit
- Altitude maximale 2000 m
- Mode de contrôle Contrôle PID ; contrôle flou ; auto-réglage ; réglage manuel ; contrôle marche-arrêt
- Type d'affichage Remarque Affichage LCD. Valeur du processus (PV) : couleur jaune, point de consigne (SV) : couleur verte, Affichage double 3,5 chiffres Précision d'affichage : 0 ou 1 chiffre à droite de la virgule (sélectionnable)
- Type d'entrée Thermocouple ; RTD ; mA ; tension
- Type de mesure Courant ; température ; tension
- Plage de mesure Type K : -200 ~ 1300°C, Type J : -100 ~ 1200°C, Type T : -200 ~ 400°C, Type E : 0 ~ 600°C, Type N : -200 ~ 1300°C, Type R : 0 ~ 1700°C, Type S : 0 ~ 1700°C, Type B : 100 ~ 1800°C, Type L : -200 ~ 850°C, Type U : -200 ~ 500°C, Type TXK : -200 ~ 800°C, RTD (JPt100) : -20 ~ 400°C, RTD (Pt100) : -200 ~ 850°C, Résistance (Ni120) : -80 ~ 300°C, Résistance (Cu50) : -50 ~ 150°C, Entrée tension analogique (0~5V) : -999~9999, Entrée tension analogique (0~10V) : -999~9999, Entrée tension analogique (0~20mA) : -999~9999, Entrée tension analogique (4~20mA) : -999~9999, Entrée tension analogique (0~50mV) : -999~9999
- Nombre d'entrées 1
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Signal de sortie Aucun
- Rampe et maintien Rampes multiples et trempage
- Humidité relative 35 % ~ 80 % HR (sans condensation)
- Type RTD Capteur Pt ou Jpt 100 Ω ; Pt100 à 3 fils
- Fréquence d'échantillonnage 10 Hz (10 mises à jour/seconde)
- Note sur la fréquence d'échantillonnage Entrée analogique : 0,1 s/scan ; Thermocouple ou RTD en platine : 0,1 s/scan
- ID de série CND3-Series
- Résistance aux chocs Max. 300m/s², 3 fois dans chacun des 3 axes, 6 directions
- Température de stockage, max 65 °C
- Température de stockage, min -20 °C
- Approvisionnement Remarque 80 ~ 260VCA 50/60Hz; 24VCA 50/60Hz ± 10 %; 24 VCC ± 10 %
- Type de thermocouple J ; K ; T ; E ; N ; R ; S ; U ; B ; L ; TXK
- Résistance aux vibrations 10 à 55Hz, 10m/s² pendant 10 min, dans les directions X, Y et Z
Le nouveau contrôleur de température et de processus Omega série CND3 est conçu avec un matériel amélioré et des spécifications plus élevées pour offrir un fonctionnement intelligent, une réponse rapide et une utilisation facile, ainsi que des touches de fonction conviviales et définies par l'utilisateur. Grâce aux fonctions de contrôle de température PID et FUZZY à réglage automatique, les contrôleurs peuvent être installés dans des applications en espace ouvert ou confiné et sont capables de présenter une courbe de contrôle de température régulière.
Applications incluses : Machines pour les industries de l'impression, de l'emballage alimentaire, de la fabrication de panneaux solaires et de l'électronique de pointe.
Applications incluses : Machines pour les industries de l'impression, de l'emballage alimentaire, de la fabrication de panneaux solaires et de l'électronique de pointe.
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 3 out of
5
by
Dave AGCA from
Outstanding controller, abysmal manual.
This would be a 5+ star product if it weren't for the extraordinarily poor manual. This is a complex controller with a tremendous number of features and settings that can handle very difficult process control problems easily...once you figure out how to use it. Technical support, while very well meaning and committed to helping, was of not much assistance as they also relied on the same manual, and generally suggested "reading the manual" as a way out. I wouldn't have called if I hadn't read the manual. I will admit, that I am old, but I have been using Omega controllers for decades with few problems. The descriptions in the manual for this excellent controller were abysmal.
Date published: 2021-06-26
Rated 1 out of
5
by
qusai from
DONT DO THSI TO YOURSELF!
Extremely hard to program. You don't want to be spending hours just trying to program a simple step heating process and it still not working. Instructions aren't the best. There is no sense of hierarchy in the instruction steps nor a clear description of what each term means.
Date published: 2023-11-14
Rated 5 out of
5
by
West O Beer from
Already purchased a second time
Controller was shipped and received quickly, works perfectly for our temp control at the brewery.
Date published: 2023-09-13
Rated 1 out of
5
by
Oyvind from
DON'T
The unit was so hard to program that even with Omega engineers helping/instructing me over the phone I could not get it to work. After 4 calls and about 8 hours on the phone I gave up.
Date published: 2021-03-12
Rated 5 out of
5
by
Ian B from
Capable, Simple, Affordable Controller
Handy little controller that has worked flawlessly so far. Installed to replace the failing electronics in a drying oven and found it easy to adapt to relatively low temperature use with the appropriate limits and alarms. Has brought control temperatures (using the same sensor) within 2C of the setpoint compared to 10C with the older electronics.
Date published: 2022-09-12
Rated 5 out of
5
by
Jamar Mechanical from
Very Reliable
I could not locate the OEM controller, so I called Dwyer/Omega after speaking with their product specialest they were able to quickly come up with the controller that turns out to work better then the OEM one that it replaced, also giving me a feature which was an issue with the OEM controller which was to lock out the controler at different levels, enabling the user to only access what is needed, so for me, this controller was the way to go, Thank you Dwyer/ Omega
Date published: 2025-04-22
Rated 4 out of
5
by
AcmeVial from
CND3 Temperature Controller
Great features for the price, especially the Auto-Tune feature. The manual it comes with is not very helpful so don't expect it to teach you how to set up a Temperature Controller. The online manuals are slightly better. Once you wrap you head around the programming aspect it's a great controller.
Date published: 2025-02-21
Rated 4 out of
5
by
J Williams from
Great Controller
Great controller but Tech Support thru "Contact Support" on website had little knowledge of how to help with controller functions. Some trial and error, and too much manual reading to make it do what I wanted.
Date published: 2024-06-24
Is output 1 the linear V output. Is it max 250V @ 5amp? Can it work on a contactor with a 110/120V coil?
Thank you for your inquiry Tennessee1074. The 250 Vac @ 5 A output you are referring to is for the relay output of the controller. Yes, it can handle any voltage below 250 Vac as long the current rating of the load is below 5 A.
Date published: 2024-09-30
Hi. CN16D3-L-AC PDI controller, What ore the outputs options and if more than one. How do I change the output mode.
The specific model number CN16D3-L-AC has one Linear Voltage output only.
Date published: 2020-08-27
Can the CN16D3-M-DC float since it is being suppled with 24 V DC?
Thank you for your inquiry. This model operates on DC Power: 24 VDC ±10%, 5W max and does not require an earth ground connection.
Date published: 2021-12-13
Can the variables, in particular P, be negative?
Thank you for your inquiry. No it can not be negative.
Date published: 2021-09-20
Do you have a heater contactor for running (2) 1500 Watt, 240 VAC heaters ? Need (2) contactors each rated for 10 or 15A, in an enclosure.
Hi Iceman,
Thank you for the inquiry.
Our control relays are currently limited to 10 A service;
https://br.omega.com/omegaFiles/auto/pdf/XTRE_SERIES.pdf
https://www.omega.com/en-us/communication-and-connectivity/interface-cards/electromechanical-relays/xtre-series/p/XTRE10B40A
Best regards
OMEGA
Date published: 2020-04-02
omega recommend a cm16d3-m-ac controller how do i hook up wires to retransmit temperature signal to a plc
The output of this controller is a 'powered output' so simply run terminal # 5 (+) to the Positive input of your PLC, and #4 (-) to the Negative input of your PLC.
Date published: 2020-03-26
Hi, Model CN16D3-M-AC --> Can you confirm this would work connecting the DC output of controller to the control of a SSR model SSRL240DC10? thx!
Hi Directandrew,
This will not work. You'll need the version with DC pulse; CN16D3-S-AC.
Best regards,
Omega
Date published: 2021-01-13
What is the depth of the CN16D3-M-AC controller? Could not find the info in the manual or via chat.
Thank you for your inquiry! The depth needed for the panel cutout is 79.7mm. If you need the depth for the entire controller itself please reach out to temp@omega.com.
Date published: 2021-05-28