1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CN745
1/16 DIN Temperature Controllers
Choisir une variante
Sortie de commande
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Approvisionnement Remarque | 100 to 240 Vac, 50/60 Hz |
| Bordure avant | 48 mm² |
| Caractéristiques nominales du boîtier | IP66 |
| Détails de la sortie | 4 to 20 mA;4 to 20 mA |
| Facteur de forme | 1/16 DIN |
| ID de série | CN740-Series |
| Interface de données | RS485 Modbus |
| Nombre d'entrées | 1 |
| Nombre de sorties de commande | 1 |
| Plage de mesure | Type B : 100 to 1800°C, Type S : 0 to 1700°C, Type R : 0 to 1700°C, Type N : -200 to 1300°C, Type E : 0 to 600°C, Type T : -20 to 400°C, -200 to 400°C, Type J : -20 to 400°C, -100 to 850°C, Type K : 200 to 1300°C, -200 to 500°C, Type L : -200 to 500°C, Type U : -200 to 800°C, RTD : 0 to 100°C, -20 to 500°C, -200 to 600°C |
| Poids | 114 g |
| Profondeur derrière le panneau | 80 mm |
| Précision | ± 0.25% span, ± 1 least significant digit |
| Sauvegarde de la mémoire | Non-Volatile |
| Signal de sortie | Current |
| Sortie de commande | Aucune |
| Taille d'affichage | 6.35 mm (.25 in) |
| Température de fonctionnement, max | 50 °C |
| Température de fonctionnement, min | 0 °C |
| Tension d'alimentation | 100 to 240 Vac |
| Type d'affichage | 4 Digit LED |
| Type d'affichage Remarque | 3.5 Digit Dual Display, Two 4-digit, 7 segment 6.35 mm H (0.25") LEDs PV: Red SV: Green |
| Type d'approvisionnement électrique | AC |
| Type d'entrée | Thermocouple, RTD, Thermistor |
| Type de mesure | Temperature |
| Valeur brute du poids | 0.37 |
| Épaisseur maximale du panneau | 9.5 mm |
| Pays d'origine | India |
| Voir toutes les spécifications | |
PDF & Manuels
Logiciels & Pilotes
Accessoires
Afficher les évaluations et les avis
Rated 5 out of
5
by
Just some guy from
inexpensive, works well.
I use this controller to maintain the temp in a molten salt furnace. With the auto tune it holds a constant temp with minimal over shoot and fast reaction time.
Date published: 2016-03-03
Rated 2 out of
5
by
Mr Z from
Reliability is marginal
Originally had six units, three failed after 1 year. The internal relay contacts became intermittent, one fused in the "on" position. They are only switching 2 amps, and are rated for 5.
Date published: 2017-02-24
Rated 5 out of
5
by
John Orzechowski from
CN9000A Replacement
Perfect replacement to the CN9000A, to be used in a NASCAR Oil Temperature Heater control for warming the engine oil and circulation before the engine is started. With this ability we don't have keep as close as an eye on the oil temperature in the tank while working this process that takes approximately 1 hour.
Date published: 2025-09-07
Rated 4 out of
5
by
MaryP from
1/16 DIN Temperature Controllers
Product works well and can easily be integrated with most controls systems. The only complaint is that the lead time is often quite long if the items are not in stock.
Date published: 2023-11-06
Rated 2 out of
5
by
MDIAS LLC from
Incorrect controller purchased
Cannot give a good rating becauae I was unable to use this product due to incorrect purchase. I found it difficult to select the correct type of controller on the site.
Date published: 2023-03-12
Rated 5 out of
5
by
oventec from
good price,
works perfec, twe can use for temperature, RH, presu
Date published: 2021-10-16
Rated 5 out of
5
by
John6800 from
Controller features have On/Off and PID Control
Because this controller has both On/Off & PID Control I was able to configure it to my oven.
Date published: 2018-03-28
Rated 5 out of
5
by
Bobble from
Great Service
Bought this recently and pleased that I did, it performs as advertised.
Date published: 2017-10-26