1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CN16D3-M-AC
CND3 Contrôleur PID de température et de procédé
Choisir une variante
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Altitude maximale | 2000 m |
| Approvisionnement Remarque | 80 ~ 260VCA 50/60Hz; 24VCA 50/60Hz ± 10 %; 24 VCC ± 10 % |
| Détails de la sortie | Sortie linéaire mA;Sortie courant : DC 4 ~ 20mA (Résistance de charge : Max. 500Ω);Sortie d'alarme - Sortie relais : Charge max. 250Vac, 3A charge résistive |
| Facteur de forme | 1/16 DIN |
| Fréquence d'échantillonnage | 10 Hz (10 mises à jour/seconde) |
| Humidité relative | 35 % ~ 80 % HR (sans condensation) |
| ID de série | CND3-Series |
| Interface de données | Aucune |
| Mode de contrôle | Contrôle PID ; contrôle flou ; auto-réglage ; réglage manuel ; contrôle marche-arrêt |
| Nombre d'entrées | 1 |
| Note sur la fréquence d'échantillonnage | Entrée analogique : 0,1 s/scan ; Thermocouple ou RTD en platine : 0,1 s/scan |
| Plage de mesure | Type K : -200 ~ 1300°C, Type J : -100 ~ 1200°C, Type T : -200 ~ 400°C, Type E : 0 ~ 600°C, Type N : -200 ~ 1300°C, Type R : 0 ~ 1700°C, Type S : 0 ~ 1700°C, Type B : 100 ~ 1800°C, Type L : -200 ~ 850°C, Type U : -200 ~ 500°C, Type TXK : -200 ~ 800°C, RTD (JPt100) : -20 ~ 400°C, RTD (Pt100) : -200 ~ 850°C, Résistance (Ni120) : -80 ~ 300°C, Résistance (Cu50) : -50 ~ 150°C, Entrée tension analogique (0~5V) : -999~9999, Entrée tension analogique (0~10V) : -999~9999, Entrée tension analogique (0~20mA) : -999~9999, Entrée tension analogique (4~20mA) : -999~9999, Entrée tension analogique (0~50mV) : -999~9999 |
| Rampe et maintien | Rampes multiples et trempage |
| Résistance aux chocs | Max. 300m/s², 3 fois dans chacun des 3 axes, 6 directions |
| Résistance aux vibrations | 10 à 55Hz, 10m/s² pendant 10 min, dans les directions X, Y et Z |
| Signal de sortie | Aucun |
| Sortie de commande | mA analogique |
| Température de fonctionnement, max | 50 °C |
| Température de fonctionnement, min | 0 °C |
| Température de stockage, max | 65 °C |
| Température de stockage, min | -20 °C |
| Tension d'alimentation | 80 à 260 Vca |
| Type RTD | Capteur Pt ou Jpt 100 Ω ; Pt100 à 3 fils |
| Type d'affichage | Écran LCD à 3,5 chiffres |
| Type d'affichage Remarque | Affichage LCD. Valeur du processus (PV) : couleur jaune, point de consigne (SV) : couleur verte, Affichage double 3,5 chiffres Précision d'affichage : 0 ou 1 chiffre à droite de la virgule (sélectionnable) |
| Type d'approvisionnement électrique | CA |
| Type d'entrée | Thermocouple ; RTD ; mA ; tension |
| Type de mesure | Courant ; température ; tension |
| Type de thermocouple | J ; K ; T ; E ; N ; R ; S ; U ; B ; L ; TXK |
| Valeur brute du poids | 0.34 |
| Pays d'origine | China |
| Voir toutes les spécifications | |
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 3 out of
5
by
Dave AGCA from
Outstanding controller, abysmal manual.
This would be a 5+ star product if it weren't for the extraordinarily poor manual. This is a complex controller with a tremendous number of features and settings that can handle very difficult process control problems easily...once you figure out how to use it. Technical support, while very well meaning and committed to helping, was of not much assistance as they also relied on the same manual, and generally suggested "reading the manual" as a way out. I wouldn't have called if I hadn't read the manual. I will admit, that I am old, but I have been using Omega controllers for decades with few problems. The descriptions in the manual for this excellent controller were abysmal.
Date published: 2021-06-26
Rated 1 out of
5
by
qusai from
DONT DO THSI TO YOURSELF!
Extremely hard to program. You don't want to be spending hours just trying to program a simple step heating process and it still not working. Instructions aren't the best. There is no sense of hierarchy in the instruction steps nor a clear description of what each term means.
Date published: 2023-11-14
Rated 5 out of
5
by
West O Beer from
Already purchased a second time
Controller was shipped and received quickly, works perfectly for our temp control at the brewery.
Date published: 2023-09-13
Rated 1 out of
5
by
Oyvind from
DON'T
The unit was so hard to program that even with Omega engineers helping/instructing me over the phone I could not get it to work. After 4 calls and about 8 hours on the phone I gave up.
Date published: 2021-03-12
Rated 5 out of
5
by
Ian B from
Capable, Simple, Affordable Controller
Handy little controller that has worked flawlessly so far. Installed to replace the failing electronics in a drying oven and found it easy to adapt to relatively low temperature use with the appropriate limits and alarms. Has brought control temperatures (using the same sensor) within 2C of the setpoint compared to 10C with the older electronics.
Date published: 2022-09-12
Rated 5 out of
5
by
Jamar Mechanical from
Very Reliable
I could not locate the OEM controller, so I called Dwyer/Omega after speaking with their product specialest they were able to quickly come up with the controller that turns out to work better then the OEM one that it replaced, also giving me a feature which was an issue with the OEM controller which was to lock out the controler at different levels, enabling the user to only access what is needed, so for me, this controller was the way to go, Thank you Dwyer/ Omega
Date published: 2025-04-22
Rated 4 out of
5
by
AcmeVial from
CND3 Temperature Controller
Great features for the price, especially the Auto-Tune feature. The manual it comes with is not very helpful so don't expect it to teach you how to set up a Temperature Controller. The online manuals are slightly better. Once you wrap you head around the programming aspect it's a great controller.
Date published: 2025-02-21
Rated 4 out of
5
by
J Williams from
Great Controller
Great controller but Tech Support thru "Contact Support" on website had little knowledge of how to help with controller functions. Some trial and error, and too much manual reading to make it do what I wanted.
Date published: 2024-06-24