1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
LC201
Cellules de charge en ligne miniatures, filetées, de 0,75 po de diamètre
Modèles en stock
- Étalonnage traçable NIST à 5 points fourni
- Boîtier subminiature pour applications robotiques, diamètre de 0,75" (19 mm)
- Plages disponibles de 0-25 à 0-300 lb
- Double goujon de montage pour une installation facile
LC201
À partir de
C$
1,351.84
Modèles en stock
Aperçu du produit
- Étalonnage en 5 points 0%; 50%; 100%; 50%; 0%
- Option d'étalonnage 5 POINTS NIST
- Connexion électrique Câble
- Caractéristiques nominales du boîtier IP54
- Type de force Compression, Tension
- Résistance d'entrée 360 Ω min
- Type de cellule de charge En ligne
- Matériaux Acier inoxydable
- Température de fonctionnement, max 121 °C
- Température de fonctionnement, min -54 °C
- Résistance de sortie 350 ± 10 Ω
- Surcharge, max 300 % FS
- Température maximale du processus 71 °C
- Température minimale du processus 16 °C
- Surcharge sécurisée 150 % FS
- ID de série LC201
- Approvisionnement Remarque 10 VCC, 15 VCC maximum
- Effet de la plage thermique 0,018 % FSO/°C
- Effet thermique zéro 0,018 % FSO/°C
- Tableau de câblage/connecteurs Vert : sortie (+) ; blanc : sortie (−) ; noir : entrée (−) ; rouge : entrée (+)
- Erreur de zéro/équilibre ± 2 %
La cellule de charge subminiature de la série LC201 d'OMEGA est conçue pour les environnements exigeants de l'automatisation industrielle et de la robotique. Avec un diamètre de seulement 19 mm et une construction entièrement en acier inoxydable, elle peut s'intégrer dans de petits systèmes et résister à des environnements difficiles. La LC201 offre une grande précision et une fiabilité à long terme dans un boîtier subminiature.
La LC 201 est également disponible en configurations métriques, avec des échelles de 0-100 à 0-500 N et des filetages métriques. Veuillez consulter le LCM201 pour plus de détails, ou contacter notre service Pression pour plus d'informations.
La LC 201 est également disponible en configurations métriques, avec des échelles de 0-100 à 0-500 N et des filetages métriques. Veuillez consulter le LCM201 pour plus de détails, ou contacter notre service Pression pour plus d'informations.
PDF & Manuels
Accessoires
installation hardware
meters/controllers
Compteur de panneau 1/8 DIN pour thermocouple et RTD avec grand affichage couleur sélectionnable
C$707.44 / each
0 En stock
Indicateur de jauge de contrainte haute performance, affichage haute résolution à 6 chiffres
C$1,515.23 / each
0 En stock
signal conditioners
Conditionneurs sur rail DIN convertissant les entrées de pont en mA ou en tension
C$884.83 / each
35 En stock
Strain Amplifier/Signal Conditioners Modules for Strain Gages, Load Cells and Transducers
C$1,039.58 / each
0 En stock
Afficher les évaluations et les avis
Rated 5 out of
5
by
Jamil Hamadeh from
Load Cell for Robotic Application
Great customer support, quick order processing. Highly Recommend Omega Products.
Date published: 2024-02-19
For Item# LC201-100 Subminiature Tension and Compression Load Cell, 0.75 in Diameter what kind of meters are available?
Thank you for your inquiry
We have a large array of meters that will work.
Please contact the engineering group to discuss.
Date published: 2020-03-06
What size are the mounting studs for the LC201-300? Do you have dimension prints?
Please contact our Pressure Department at 1-888-826-6342 or pressure@omega.com regarding this request.
Date published: 2024-12-31
Is there data available regarding the expected life in cycles?
Our load cells have been tested to greater than 100,000 cycles
Date published: 2024-10-08
Can this be used in a two in parallel configuration? Any considerations with this?
Hello, the load cells has a nominal output of 2 mV/V but please note that they are not interchangeable, meaning both load cells will not put out an exact 2 mV/V at full load. So if you run them in parallel, you will see some deviation in output.
Date published: 2023-10-24
What would be the maximum load that could be applied to the cell before damage would be induced? For example I have an application where I need accurate results up to 80N but I have intermittent loads up to 180N but I do not need data above 80N.
Thank you for your question?
The LCM201-100N Has a maximum rating of 150n.
So no you can not go to 180n
Date published: 2019-07-15
Is there any way to have a "special" mode in order to operate above 120°C ? I need to perform some measurements at 150°C. Thank in advance,
Yes. We can provide an extended temperature compensation for the LC201/LCM201 Series load cells. By adding a "-TC2" suffix at the end of the part number the compensated temperature range would be increased 180C. You would need to add $125.00 to the base price of the load.
Date published: 2020-03-11
What's the best way to calibrate the LC201-100? We are currently using known weights to do the calibration, but the values we are getting are not making sense.
The correct way to calibrate a load cell is to use known loads. If you getting odd reading it may be the instrumentation you are using to read the signal is setup. Suggest you contact us at 1-800-826-6342 and request Pressure product technical assistance. We will you verify your setup.
Date published: 2024-11-12
I'm confused about the 2 mV/V output spec. For the LC201-300, if I have a 12V excitation and a 100 lb load, what should the output voltage be? Please include the calculation equation. Thanks!
Thank you for your inquiry
The load cell will work up to 15 vdc.
At 12 vdc you will get a 20% higher output the what was on your calibration sheet.
Hope this was helpful?
Date published: 2022-12-05