Need assistance? Call us: 1-800-663-4209
SIL2-capable-Oxygen-Analyzer
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.01 % |
| Accuracy Detail | +/- 0.02 % @ 1 %, +/- 0.01 % @ 0.1 % |
| Applications | Chemical Refineries, Gases, Industrial and Manufacturing, Laboratories, Pharmaceutical |
| Cable Length | 5 m |
| Calibration Interval | 6 to 12 months |
| Connection Note | Intrinsically Safe Connection: Voltage Uo = 6 V DC Current intensity Io = 0.2 mA Power Po = 0.3 mW Max. outer inductivity Lo = 1000 mH Max. outer capacity Co = 10 μF |
| Control Output | Alarm |
| Data Interface | RS485 |
| Display Type | LCD |
| Electrical Output | 4 to 20 mA |
| Enclosure Material | PBT |
| Enclosure Ratings | IP20 |
| Flow Rate Note | 100 to 500 ml/min (250 ml/min optimal) in a vented atmosphere |
| Gas Measurement Range | 0 to 25 % |
| Indicator Type | LCD and LED alerts on analyzer |
| Length | 70 mm |
| Lifetime | up to 24 mo |
| Operating Humidity | 0 to 95% RH, non-condensing |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | -20 °C |
| Output Detail | Relay Contact Outputs RL1 / RL2 / Alarm: Switching power max.: 62.5 V A resp max. 30 W Switching voltage: Um 125 V AC/110 V DC Min. current 10 uA DC Min. voltage 10 mV DC According to IEC 947-5-1 resp. EN 60947 Transistor Output (DO): Switching parameters: < 28 V @ < 50 mA |
| Power Consumption | 1.5 W |
| Process Connection Size | 2 in |
| Process Connection Type | Tri-Clamp |
| Relay Output | 1 A @ 30 Vdc, 0.5 A @ 125 Vac |
| Resolution | 0.01% |
| Response Time | <20 seconds, typically 12 seconds |
| Sensitivity | 0.02 % +/- 0.01 |
| Series ID | SIL2-capable-Oxygen-Analyzer |
| Shelf Life | 12 months |
| Supply Power Type | DC |
| Supply Voltage | 24 Vdc |
| Width | 100 mm |
| See All Specs | |