Skip to search Skip to main content Skip to navigation

OME-WISE-7118Z

Web - Based Intelligent PAC Controllers

0.0

(0)

Click and hold to zoom

Choose a Variant

Input Type

Voltage, Current, Thermocouple RTD Voltage, Current Voltage, Current, Digital Digital N/A

Number of Channels, Input

Analog: 10 DIFF Analog: 7 DIFF Analog: 8 DIFF Analog: 6 DIFF, Digital: 2 Digital: 8 Digital: 16 Digital: 6 N/A

Output Signal

Digital N/A Current, Voltage Power Relay

Electrical Output

Isolated open collector (Sink) N/A Open Collector (Source)

See all Models See all accessories

$1,225.37

Item# OME-WISE-7118Z

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 3 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Analog I/O Note	Analog Input Note: Analog Input;Input Channels: 10 (differential), Input Type: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 to 20 mA, 4 to 20 mA, (requires optional external 125 Ω resistor), thermocouple (J, K, T, E, R, S, B, N, C, L, M, LDIN43710), Resolution: 16-bit, Sampling Rate: 10 sample/second (total);Accuracy: ±0.1% or better;Zero Drift: ±0.5 uV/°C;Span Drift: ±25 ppm/°C;Overvoltage;Protection: 240 Vrms ;Input Impedance: >300 kΩ;Common Mode Rejection: 150 dB minimum;Normal Mode Rejection: 100 dB;Individual Channel Configuration: Yes;Temperature Outputs Consistency: Yes;Stable Temperature Output in The Field: Yes;Open Wire Detection: Yes
CMRR	86 dB
Configuration	16-bit, SRAM: 512 KB, Flash Memory: 512KB
Current Measurement Range	±20 mA, 0 to 20 mA, 4 to 20 mA
Data Interface	Ethernet
Data Interface Note	Ethernet Port: 10/100 Base-TX and automatic MDI/MDI-X with PoE (Power over Ethernet);Watchdog: Single;Supported Operating System: MiniOS7;Web HMI: Yes, I/O Pair Connection: Yes
Digital I/O Note	Digital Output: Output Channels: 6 Output Type: Isolated open collector (Sink) Maximum Load Current: 700 mA/channel Load Voltage: 5 to 50 Vdc Overvoltage Protection: 60 Vdc Overload Protection: 1.4 A Short-Circuit Protection: Yes
Drift	Zero: ±0.5 μV/°C, Span: ±25 ppm/°C
Electrical Output	Isolated open collector (Sink)
Height	35 mm
Impedance Input	>300 kΩ
Input Type	Voltage, Current, Thermocouple
Input Type Note	Thermocouple: J, K, T, E, R, S, B, N, C, L, M, LDIN43710
Input Voltage Note	Absolute Maximum Input Voltage: Power on: 50 Vdc, Power off 4 Vdc
Isolation	2500 Vdc, 2-Way
LED Indicators	PoE Power: PoE on, L1: System running, L2: Ethernet link/act, L3: Ethernet 10/100M speed
Length	123 mm
Memory	EEPROM: 16KB
Mounting	DIN-Rail or Wall Mount
NMRR	100 dB
Number of Channels, Input	Analog: 10 DIFF
Number of Channels, Output	Digital: 6
Operating Temperature, Max	75 °C
Operating Temperature, Min	-25 °C
Output Signal	Digital
Power Consumption	3 W
Relative Humidity	10 to 90% RH, non-condensing
Software	Built in: OME-WISE Firmware
Software Settings	• Rule Configuration Website: Access Web server on OME-WISE-7000 controllers to edit and upload logic rules through web browser • 36 IF-THEN-ELSE Logic Rules: 3 IF conditions with AND or OR operators; 3 THEN actions; 3 ELSE actions • 48 Internal Registers: Hold temporary variables and read/write data via MODBUS/TCP address • 12 Timers: Delay/timing functions • 12 Emails: Send email messages to pre-setemail receivers • 12 CGI Commands: Send pre-set CGI commands • 12 Recipes: Set up THEN/ELSE action groups • 8 P2P Remote Modules: Set up the connection information for the remote OME-WISE-7000 modules • Rule Configuration Website: Access Web server on OME-WISE-7000 controllers to edit and upload logic rules through web browser • MODBUS/TCP Protocol: Real time control and monitoring I/O channels and system status of controllers via SCADA software"
Storage Temperature, Max	80 °C
Storage Temperature, Min	-30 °C
Supply Voltage	12 to 48 Vdc
Voltage Measurement Range	±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V
Width	72 mm
See All Specs Show Less