1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-VOLT101A-2.5V
Voltage Data Loggers, Part of the NOMAD® Family
Choose a Variant
Voltage Measurement Range
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Detail | Nominal range @ 25°C |
| Alarm | User selectable high and low limits; blinking LED for alarm and low battery |
| Baud Rate | 115200 |
| Calibration Accuracy | ±0.05% |
| Calibration Note | Digital calibration through software, automatically recorded within device |
| Conversion Time | 133 ms |
| Current Measurement Range | N/A |
| Data Interface | USB |
| Electrical Connection | Removable Screw Terminal |
| Frequency Rejection | 50 to 60 Hz |
| GrossWeightValue | 0.23 |
| Height | 1.4 in |
| Housing Depth | 1.5 in |
| Housing Height | 2.9 in |
| Housing Width | 5.8 in |
| Impedance Input | 125 kΩ |
| Input Control Signal | ± 2.5 V |
| LED Functionality | Green LED Blinks: 10 second rate to indicate logging 15 second rate to indicate delay start mode;Red LED Blinks: 10 second rate to indicate low battery and/or full memory |
| Length | 0.6 in |
| Materials | Aluminum, ABS |
| Measurement Type | Voltage |
| Memory | 1,000,000 readings |
| Memory Modes | Yes |
| Memory Note | 1,000,000 readings; software configurable memory wrap 333,000 readings in multiple start/ stop mode |
| Number of Channels | 1 |
| Operating Temperature, Max | 80 °C |
| Operating Temperature, Min | -40 °C |
| Overload Protection | ±50 V |
| Programmable Functions | Security |
| Real Time Recording | May be used with PC to monitor and record data in real time |
| Relative Humidity | 0 to 95% RH |
| Resolution | 0.1 mV |
| Sampling Rate Note | 4 readings a second (4 hz) to 1 reading every 24 hours |
| Series ID | OM-CP-VOLT101A-Series |
| Software | WIN XP SP3/VISTA/7 and 8 |
| Start Modes | Button Push, Delayed Start, Immediate Start |
| Supply Power | 3.6 V Lithium Battery |
| Supply Power Note | 10 Years typical at a 15 Minute Reading Rate |
| Supply Power Type | Battery |
| Time Accuracy | ±1 minute/month (at 20ºC, stand alone logging) |
| Voltage Measurement Range | ± 3 Vdc |
| Weight | 24 g |
| Width | 2.2 in |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
Show Ratings & Reviews
Rated 1 out of
5
by
ppus from
Does not work out of box, add'tl products needed
No standard USB port, no response. Per support, that's until you connect the SW using custom cable, and start the unit, which is not mentioned in manual for the HW or on web page.
Expensive for that function.(single channel)
Date published: 2017-12-15
Rated 1 out of
5
by
Pletric from
Does not work right out of the box
I wish I would have read the reviews prior to ordering. This product does not work right out of the box. You have to start it up using software, not included, and an adapter cable, also not included. It is not clear from the description that these items are required to use this tool.
Date published: 2018-05-10