1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FLMW-1205SS-MA
Variable Area In-line Liquid Flowmeters
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 2 % |
| Additional Features 1 | Dual Reading Scale |
| Diameter | 1.875 in |
| GrossWeightValue | 0.15 |
| Length | 6.6 in |
| Materials | Stainless Steel |
| Materials, Wetted | Buna-N (NBR), EPR, FKM, Perfluoroelastomer, PTFE, Stainless Steel |
| Mechanical Life | >10^7 cycles |
| Media Compatibility | Clean process / cooling water |
| Operating Pressure Note | 410 bar (6000 psig) up to 116°C (240°F) |
| Operating Pressure, Max | 6000 psi |
| Output Detail | 4 to 20 mA ouput (12 to 35 Vdc powered) |
| Output Signal | Current |
| Particle Size, Max | 76 μm |
| Process Connection Size | 1/2 in |
| Process Connection Type | NPT Female |
| Process Temperature, Max | 116 °C |
| Repeatability | ± 1% |
| Scale | Direct Read |
| Scale Media Calibration | Water |
| Series ID | FLMH-FLMW-Series |
| Standard Calibration Fluid | Tap water @ 21°C (70°F), 1.0 sg |
| Valve Included | false |
| Water Flow, Max | 5 GPM |
| Water Flow, Min | 0.5 GPM |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Tulo from
Valve continuos purging system monitoring
Common medium for this application is high pressure hot oil (160C) that is required in a very small flow capacity (10÷20lit/h per one valve).
Date published: 2018-04-23