1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
- Home
- See Temperature
- See Temperature Accessories
- See Crimping Tools
- Thermocouple Wire Stripper for OMEGACLAD Wire
We noticed you are from . Visit your local site for regional offers and live support.
PST-CLAD-STRIP
Thermocouple Wire Stripper for OMEGACLAD Wire
Models In Stock
- Larger Chip Ports for Continuous Self-Cleaning
- Power Tool Adaptor Standard
- Expanded Range of Sizes
PST-CLAD-STRIP
From
$
126.42
Models In Stock
Product Overview
- Insulation MgO
Strippers for both metric and standard wire
Read More
Read Less| Model Number | Nominal Sheath O.D. | Tool Tolerance | Weight | Replacement Tool Bit Model No. | Power Adaptor Size | |
| English | Metric | |||||
| PST020A | .020' | 0.50 mm | 0.019-0.021' | 1 oz | TB125 | S |
| PST025A | .025' | 0.60 mm | 0.024-0.026' | 1 oz | TB125 | S |
| PST032A | .032' | 0.79 mm | 0.031-0.034' | 1 oz | TB125 | S |
| PST040A | .040' | 1.00 mm | 0.040-0.044' | 21/2 oz | TB188 | M |
| PST062A | 1/16' | 1.50 mm | 0.060-0.064' | 21/2 oz | TB188 | M |
| PST065A | 1/16' | 1.57 mm | 0.063-0.067' | 21/2 oz | TB188 | M |
| PST20MMA | 0.080' | 2.00 mm | 0.077-0.083' | 21/2 oz | TB188 | M |
| PST090A | 3/32' | 2.38 mm | 0.090-0.094' | 21/2 oz | TB188 | M |
| PST30MMA | 0.118' | 3.00 mm | 0.115-0.121' | 41/2 oz | TB250 | M |
| PST125A | 1/8' | 3.17 mm | 0.122-0.128' | 41/2 oz | TB250 | M |
| PST45MMA | 0.177' | 4.50 mm | 0.174-0.180' | 8 oz | TB250 | L |
| PST187A | 3/16' | 4.75 mm | 0.185-0.190' | 8 oz | TB250 | L |
| PST60MMA | 0.236' | 6.00 mm | 0.233-0.239' | 8 oz | TB250 | L |
| PST250A | 1/4' | 6.25 mm | 0.247-0.253' | 8 oz | TB250 | L |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Works Great
Bought 3 of them a few months ago and after doing a little adjusting of the cutter it works great.
Date published: 2019-06-16
Rated 1 out of
5
by
JEK20 from
Could not get it work
I bought two PST020A thermocouple wire strippers and they did not work. I followed the directions and tried everything I could think of but they simply did not work. I would say you're better off to order a custom 0.020" diameter thermocouple with the sheathing stripped than to try and use this wire stripper.
Date published: 2016-06-13
Rated 5 out of
5
by
Mike ST from
Excellent Tool. Would buy again.
Very well made tool. The ratcheting gear teeth are very fine mesh and it is very easy to crimp even the largest brass fittings. The handle grip is very comfortable. I highly recommend this crimper tool.
Date published: 2023-02-27
Rated 5 out of
5
by
CooperLab from
Very nice tool
Purchased this to strip the sheath from Mineral Insulated Cable (304-K-MO-062-DUAL-SLE). The stripper works very well and efficiently with a little bit of adjustment. There is a set screw which allows you to adjust the position of the cutting tool. Initially the tool was too close to the center, which caused the stripper to cut through the the sheath, insulation, and thermocouple wire. Actually that setting worked pretty well for cleaning up the cable after being cut to length with side cutters. Then after adjusting the tool back a bit, so that it only removed the outer sheath, it worked perfectly to strip the sheath. I used it in a power drill with around 300 rpm with light to moderate pressure, with the mineral cable claimed in a vice with soft jaws.
Overall a very nice tool, and pretty much the only way to efficiently and cleanly strip mineral insulated cable.
Date published: 2020-11-07
- y_2025, m_6, d_28, h_6
- bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasreviews, tv_0, tr_4
- loc_en_US, sid_PST020A, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getReviews, 3ms
- REVIEWS, PRODUCT
Do you sale the bottom plate where you insert the wire? I did not see that in your data sheet.
Asked by: Anonymous2023
Omega only sells the wire stripper portion and the replacement tool bit for this product.
Answered by: ApplicationsEngineerANB
Date published: 2023-06-23
How do you set the cutter blade? For a 2mm diameter sheath, do I use a smaller pin and adjust? Can't find any documentation for adjusting the cutter blade depth...
Asked by: Wade at Waters
Move blade to touch material. Back out material and move blade in .010.
Answered by: Engineer9
Date published: 2022-01-20
Can you buy a replacement blade?
Asked by: Anonymous
Hi Anonymous,
Yes replacements are available. Please refer to the data sheet for the size and part# for your application.
Best regards
OMEGA
Answered by: NorwalkAE_RS
Date published: 2021-07-27
- y_2025, m_6, d_28, h_6CST
- bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
- cp_1, bvpage1
- co_hasquestionsanswers, tq_3
- loc_en_US, sid_PST020A, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
- clientName_omega
- bvseo_sdk, java_sdk, bvseo-4.0.0
- CLOUD, getContent, 53ms
- QUESTIONS, PRODUCT