1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PR-26-Metric
Vibration Resistant Metric RTD Probes with M12 Connectors
Models In Stock
- Operating range: -50 to 500°C (-58 to 932°F) sensing end, -50 to 250°C (-58 to 482°F) at connector end
- All welded 316L SS housing and probe, available with or without mounting threads (M8, M10, G1/4, G1/2)
- Pt100 or Pt1000 RTD, Class A accuracy from -50 to 300°C (-58 to 572°F)
- 6 mm diameter, custom lengths available
PR-26-Metric
From
$
119.62
Models In Stock
Product Overview
- Accuracy Class A
- Accuracy Detail Pt100 or Pt1000 4-Wire Platinum RTD Elements (IEC60751) Class A from -50 to 300°C, Class B from 300 to 500°C
- Color Code Standard ANSI
- Connector Temperature, Max 250 °C
- Connector Temperature, Min -50 °C
- Electrical Connection M12 4 pin Male
- Number of Wires 4
- Operating Temperature, Max 500 °C
- Operating Temperature, Min -50 °C
- Sheath Material 316L Stainless Steel
- Temperature Sensor Type RTD
- Thermocouple Type N/A
Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation.
Omega's RTD sensors with M12 connections are designed to provide for easy and efficient installation or removal of these sensors for periodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays in order to calibrate or replace the sensor, now you simply disconnect the sensor from the extension cable saving cost and downtime. The Omega PR-26 RTD is a flexible and robust temperature sensor made with 316L Stainless Steel housings and sheaths for strength and corrosion resistance. The probe stem is made from mineral insulated cable which produces a sensor that can be used to 500°C, and can be bent (except for the first 50 mm of the tip) to fit your application.
These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables. Unlike other M12 enabled sensors that have a maximum rating of 85 or 90°C on their connections, the PR-26 RTD can really take the heat with a connector rating of 250°C. Combine this sensor with one of our proprietary M12CM-T24SSPC high temperature extension cables and you have a probe/cable combination that is unmatched in the industry.
The mounting thread options on the PR-26 Series sensors allow them to be used in a wide variety of applications, including:
Stand alone immersion sensors. Installed directly into your product or process using an existing metric threaded port. When combined with our M12-Handle, non-threaded "A" style PR-26 probes can be used in hand-held sensing applications. Other applications using a variety of available compression fittings or other accessories. These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your measurement connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-26 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available when combined with a 4-pin female M12 connector extension or patch cable.
Omega's RTD sensors with M12 connections are designed to provide for easy and efficient installation or removal of these sensors for periodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays in order to calibrate or replace the sensor, now you simply disconnect the sensor from the extension cable saving cost and downtime. The Omega PR-26 RTD is a flexible and robust temperature sensor made with 316L Stainless Steel housings and sheaths for strength and corrosion resistance. The probe stem is made from mineral insulated cable which produces a sensor that can be used to 500°C, and can be bent (except for the first 50 mm of the tip) to fit your application.
These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables. Unlike other M12 enabled sensors that have a maximum rating of 85 or 90°C on their connections, the PR-26 RTD can really take the heat with a connector rating of 250°C. Combine this sensor with one of our proprietary M12CM-T24SSPC high temperature extension cables and you have a probe/cable combination that is unmatched in the industry.
The mounting thread options on the PR-26 Series sensors allow them to be used in a wide variety of applications, including:
PDFs & Manuals
Accessories
accessories
Miniature Temperature Transmitter for Sanitary RTD Probes and Sensors
$262.23
0 In Stock
Show Ratings & Reviews
Hi, Can you please advise if this product is RoHS compliant? Thank You
Hello, our compliance specialist has advised this item remains undetermined for RoHS compliance at this time. Please contact our Tech Support if you have any further questions, thank you.
Date published: 2019-06-12
Is-this product RoHS?
Hello, our compliance specialist has advised this item remains undetermined for RoHS compliance at this time. Please contact our Tech Support if you have any further questions, thank you.
Date published: 2019-06-12
Is this product RoHS?
Hello, our compliance specialist has advised this item remains undetermined for RoHS compliance at this time. Please contact our Tech Support if you have any further questions, thank you.
Date published: 2019-06-12