1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
TJ36-GG
Rugged Thermocouple Transition Joint Probes with Fiberglass Insulated Cable
Models In Stock
- Use of Fiberglass and Ceramic Insulation Allows the Transition Joint to be Used Up to 482°C (900°F)
- 304 SS and Inconel 600
- Additionnal Sheaths Available: 310 SS, 316 SS, 321 SS and Super OMEGACLAD™ XL
- Manufactured Compacted Mineral Insulation Cable for Long Lasting, Drift-Free Performance in Harsh Conditions
TJ36-GG
From
$
88.61
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Number of Connectors N/A
- Process Temperature, Max 900 °C
- Process Temperature, Min 0 °C
- Temperature Sensor Type Thermocouple
Probes less than 48 inches in length are shipped 'straight'. Probes equal to or greater than 48 inches in length are shipped 'coiled'. If a probe that is 48 inches or longer must ship straight, please add "-SST" to the end of the part number, and add $75.00 to the price of the probe. Maximum ship straight length is 96 inches. Additional shipping fees from carrier may also apply for non-standard length packaging.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
msm1 from
Does the job.
The company i work for uses these for process controls they last a long time and are very reliable.
Date published: 2016-04-14
Rated 5 out of
5
by
Ezat from
Thermocouple
Arrived ontime and part worked per spec. Tested at 1000 degree C and recorded output then repeated the test again and worked both times. Was able to confirm a furnace temperature.
Date published: 2025-05-02
Rated 5 out of
5
by
Lee J from
Dependable product
Durable and performs as described for my use in our testing labs
Date published: 2025-04-10
Rated 5 out of
5
by
BTgbldi from
Thermocouple cable assembly
Needed to replace an OEM thermocouple for a plc controlled wood / gas pizza oven. OEM was 3 times the price. I was able to do a custom design with K type, temperature range, cable length and probe length.
Worked like a charm. Will be buying again.
Date published: 2025-02-07
Rated 4 out of
5
by
P Richardson from
Great Service
Parts delivered on time when I needed them and were exactly what I ordered.
Date published: 2024-12-02
Rated 5 out of
5
by
SRS SBI from
Great Product and quick service.
Great product worth the purchase minimal amount of wait time.
Date published: 2024-12-02
Rated 5 out of
5
by
jlpottery from
great quality probes
great quality, I've used these for many years successfully.
Date published: 2024-09-30
Rated 5 out of
5
by
Alice Bastos from
I Recommend!
Great quality, works well, nothing to complain here! I recommend !
Date published: 2024-06-20
What pressure are these thermocouples rated for?
Thank you for your inquiry Ellie2022. Unfortunately, the TJ36 series are not pressure rated.
Date published: 2024-05-19
Hi, What is the max temperature rating for the wire that connects the probe to the K-type connector? It looks like plastic shielding on the wire and I don't want to melt it.
Thank you for your inquiry.
The max temperature the wire can handle is 260C (500F)
Date published: 2019-10-21
What length needs to be inserted into the process for an accurate reading with a 6inch probe?
Hi Peter, considering the thermocouple sensor is at the tip of the probe, it would be safe to assume 0.5-1 inch would be needed to get an accurate reading.
Date published: 2020-09-14
Can these be attached to a 2.5mm jack for use with a wireless bbq style type thermometer?
Hi Schwonkhead,
If your thermometer accepts a type K thermocouple then possibly yes. You'll need to check the wireless thermometer input specifications.
Best regards
OMEGA
Date published: 2022-12-01
What is the output of this sensor? Voltage or resistance change? Thanks.
This sensor produces millivolt output however resistance also varies based on ohms law.
Date published: 2022-09-13
Hello, Can this thermocouple be welded around section B? Also, is it able to withstand pressures to up to 500 psi? Thank you
The B section is where the Thermocouple wire is attached to the extension wire and potted. A tack weld could probably be made with a minimal amount of heat being applied. Omega does not pressure rate the probes but they do get used often in elevated pressures as what your inquiry suggests. If you need a probe with a pressure rating then the only one Omega offers is the pipe plug probe series.
Date published: 2024-02-02
Can I get this with a 10' lead?
Thank you for your inquiry. Yes we can make these as long as 50' using the CUSTOMIZE button.
Date published: 2020-07-26
I am looking for 2 stainless steel temperature probes to go into a 55 gallon drum that’s height is 34 inches. I want to hook it to a controller to manage a heating blanket to maintain a temperature between 68 to 75°F. What Would you recommend
This would need to be reviewed with a Temperature Engineer due to the complexity so please send an inquiry to temp@omega.com.
Date published: 2020-07-28