1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
Accuracy | ± 5 µA |
Accuracy Detail | (mA output/2000) or 5 uA (whichever is the greater) |
Approvals | BS EN 61326 ; 1998 – Electrical equipment for measurement and control ANNEX A ; ANNEX F |
Calibration | Pushbutton |
Diameter | 43 mm |
Electrical Connection | Screw Terminal |
Electrical Output | 4 to 20 mA |
Height | 21 mm |
Humidity Range | 10 to 90% RH non condensing |
Input Accuracy | ± 0.1 °C |
Input Control Signal | N/A |
Input Type | RTD |
Lead Resistance, Max | 20 Ω per leg |
Lead resistance effect | 0.002°C/Ω |
Operating Temperature, Max | 85 °C |
Operating Temperature, Min | -40 °C |
Output Detail | 2 wire, 4 to 20 mA current loop Maximum Output: 21.5 mA (in high burnout condition) Minimum Output: 3.8 mA (in low burnout condition) |
Output Load | [(Vsupply-10)/20] kΩ |
Probe Length | 0 mm |
Programmable Functions | offset, Range, Sensor Burnout Indication |
RTD Type | Pt100 |
Response Time | 1 sec |
Self Heating Effect | 0.2 uA/V |
Sensor Type | Transmitter |
Setup Controls | Pushbutton, Program LED will flash in bursts |
Sheath Material | N/A |
Span, Min | 25°C |
Start Up Time | I out < 4 mA during start up |
Storage Temperature, Max | 90 °C |
Storage Temperature, Min | -50 °C |
Supply Current | <200 µA |
Supply Power Type | DC |
Supply Voltage | 10 to 30 Vdc |
Temperature Coefficient | 0.00385 Ω/°C |
Temperature Input Range | -200 to 850°C |
Thermal Effects | 1 uA/°C, 25 ppm/°C |
Thermocouple Type | N/A |
Update Rate, Max | 500 ms |
Warm Up Time | 1 min to full accuracy |
Weight | 31 g |
Wiring/Connector Table | 2- or 3-Wire |
See All Specs |
PDFs & Manuals