1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
LCS-95-WOAB
Reversible Liquid Crystal Polyester Film/Plastic Sheets
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 °C (± 1.8 °F) |
| Additional Features 1 | Without Adhesive Back |
| Adhesive | Without Adhesive Back |
| Dimensions Note | approximately 0.25 mm (0.01") thick |
| Encapsulation | Polyester 5 mil stock |
| Form factor | Square |
| Functions | Display of temperature, as indicated by green event |
| GrossWeightValue | 0.15 |
| Humidity Range | N/A |
| Installation | Apply temperature indicating label to clean, dry surface. Read temperature after colors stop changing. Green is correct reading. If no green is present, temperature reading is between the blue and tan colored boxes. |
| Length | 31 cm |
| Number of Temperature Points | 4 |
| Pack Size | 1 |
| Reversible/Non Reversible | Reversible |
| Sensor Material | Non-toxic mixture of liquid crystal esters |
| Series ID | LCS-LABELS |
| Storage Humidity, Max | 0.5 |
| Storage Temperature Note | 21°C (70ºF) and 50% relative humidity |
| Storage Temperature, Max | 21 °C |
| Storage Temperature, Min | 0 °C |
| Temperature Measurement, Max | 95 °F |
| Temperature Measurement, Min | 86 °F |
| Thickness | 0.025 cm |
| Width | 31 cm |
| Country of Origin | United Kingdom |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
Bruno from
Thermochromic LC
It´s a good product to illustrate how thermochromic liquid cristals can display different colours according to temperature. I use it for interactive teaching.
Date published: 2016-07-08
Rated 5 out of
5
by
WaukDave from
Perfect for hidden heating underfloor.
Bought this for a project to repair tile on my heated floor. Saw this as an option and a way to see the wires running under the floor. The other option was a FLIR camera. For the price I paid, a lot cheaper than the FLIR, this was the way to go. It showed my wires perfectly and I was able to mark them off and conduct my repair withought the risk of damaging my under floor heating. Great product and worth the price.
Date published: 2021-02-16
Rated 5 out of
5
by
Anonymous from
Good stuff
This stuff is super helpful for PCB repair and testing. You can find hot ICs really fast. It's also helpful for ESD testing circuits. Put this on the ICs and zap away, if it changes color you know you've got a problem.
Date published: 2021-07-26