FMG71B-A

Electromagnetic Low Flow Meter

Click and hold to zoom

Output Signal

Current DC Pulse

Process Connection Type

NPT Male BSPP Male

Volumetric Flow Rate, Max

7.93 GPM 15.85 GPM 66 GPM

$2,515.95 / each

Item# FMG71B-A

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 6 weeks

Brand
Accuracy	± 1.5 %
Accuracy Detail	± 1.5% of reading ± 0.3% range
Conductivity	50 µS/cm
Current, Max	26_ma_approx
Electrical Connection	M12 4 pin Female
Enclosure Ratings	IP65, NEMA Type 4X
Flange Diameter	0.39 in
Flow Indication	LED Green
Flow Indication Note	flow proportional blinking
GrossWeightValue	0.15
Load Resistance	250 Ω
Materials	PEEK, Aluminum
Materials, Wetted	EPDM, Stainless Steel
Media Compatibility	Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
Number of Outputs	1
Operating Pressure, Max	232 psi
Operating Temperature, Max	70 °C
Operating Temperature, Min	5 °C
Output Detail	Amplified Square Wave
Output Pulse Rate Note	Square wave signal NPN, internal pull-up resistor 2 kΩ pulse duty ratio 50:50
Output Signal	Current
Power Consumption	150 mA
Process Connection Size	1/2 in
Process Connection Type	NPT Male
Process Temperature, Max	90 °C
Process Temperature, Min	0 °C
Repeatability	± 1%
Response Time	< 500 ms
Sensor Diameter	0.25 in
Series ID	FMG70B-Series
Short-Circuit Protected	< 30 V
Short-Circuit Protected Note	Measures short-circuit proof (up to 30V) and polarity protection (up to -30V)
Supply Power Note	24 Vdc ± 10%
Supply Power Type	DC
Supply Voltage	24 Vdc
Volumetric Flow Rate, Max	7.93 GPM
Volumetric Flow Rate, Min	0.13 GPM
See All Specs Show Less